Bunker Hill Security 99938 Quick Start Manual

IMPORTANT SAFETY INFORMATION
1. Mount only according to these instructions.
Improper mounting can create hazards.
2. Wear ANSI-approved safety goggles.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the
area during mounting.
5. Do not mount when tired or when under
the influence of drugs or medication.
6. This product is not a toy. Do not allow
children to play with this item.
7. Use for intended purpose(s) only.
Specifications
Light Dome
Sensor Detector Range/Angle
Battery
Installation Instructions
Read the entire Important Safety Information section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
This Motion Detector can be mounted
on a drywall or solid stud surface.
WARNING! TO PREVENT SERIOUS INJURY:
Verify that installation surface has no hidden
utility lines before drilling or driving screws.
UPC 792363999380
Item 99938
SAVE THESE INSTRUCTIONS
For technical questions, please call 1-888-866-5797.
MOTION ACTIVATED
LED SECURITY LIGHT
8. Inspect before use; do not use if
parts are loose or damaged.
9. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
10. Do not install old and new batteries together.
Do not install alkaline, carbon-zinc or
rechargeable batteries together. Position
batteries in proper polarity. Do not
use swollen or leaking batteries.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6 LED, bright white
16 ft. / 100 deg.
4 x AA (included)
1. Using the Mounting Bracket as a
template, drill two 1/8" mounting holes.
Mounting
Holes
23h
Page 1