Sharper Image MIC280 Series User Manual

尺寸：120*120mm
USER MANUAL
5V Charging/AUX
3.5mm Earphones jack
Volume + M key
Volume - Voice changing key
Power on/off
Power ON/OFF
Short press: Play/pause while music is playing
Long press: 3 seconds to turn ON/OFF
TWS Function(under Bluetooth Mode only):
Power on any two microphones at the same time (same model, same Bluetooth
name).
Double-click one of the microphone's power ON/OFF key, after hearing a BEEP tone
means two microphones connected successful, then use the external Bluetooth
device to search "MIC280" and connect to play music together.
M Key (Modes switch)
Short press: switch microphone Playback mode/LINE IN mode/Bluetooth mode
Long press: change the led light mode.
Volume Up and Down keys
︿ :Short press to increase the volume of microphone,double click to increase the echo,
long press to increase the volume of music.
﹀ :Short press to reduce the volume of microphone,double click to reduce the echo.
long press to red uce th e volume of mu sic.
Voice Changing key
Short press: Voice changing effects switch to Male voice/Female voice/Baby
voice/Monster voice/Original voice
Double click: original singing sound /cancel original singing.
5V charging/AUX: There will have 2 in 1 USB Type-C Charging and Aux-in cable,switch to LINE
IN mode then use the LINE IN cable, the side of Type-C to plug into 5V charging/AUX port on the bottom of
microphone, and for the other side using the 3.5 mm plug to connect with mobile phone to start playing music .
Headphone jack: Connect to a 3.5 mm earphone.
Note: On LINE IN mode, the speaker volume increase or decrease is invalid.
Product Wireless Karaoke Microphone
Model MIC280 series
Bluetooth
Bluetooth 5.0
version
Wattage 5Watt
276g
Weights
210mm*87mm
Size
Shell Material
Foam+ABS
Battery 1200mAh
Charging DC 5V1.0A
PAIRED WITH DIGITAL DEVICES
1. Long press the power button for 3seconds.Then the blue light flashing and speaker is
waiting for connection.
2.Turn on the Bluetooth connection of your devices to search for 'KM-108'and click'Connect.'
3.The speaker will play the sound of 'dong', then the blue light is steady on. That means
the connection is successful. If the connection is not successful, the blue light blinks slowly.
4.After pairing, press the Play button to play or pause the music.
Battery Charging :
The red light indicator will be steady on during charging and will be o fafter
battery is fully charged. When the battery is low, the battery alarm sound will
be broadcasted for three times , and the system will be shut down at the fourth
alarm . Please use a DC- 5V power adapter for charging . Improper power
adapter such as 9V or 12V Quick charger may cause hardware
damage or other faults.
Matters need to be attention:
1.Wireless signal transmission including Bluetooth is greatly afected by
the surrounding environment such as metal, tree, human body, ...etc.. and the
appropriate distance is also afacted .
2. Do not charge the battery under ire and high temperature conditions!
3.Do not use the speaker where to close the heat sources (such as ire or heater) .
4.Do not place the product in a heat source , such as to keep under the strong
sunlight or outdoor car exposed under the sunlight, which will degrade the battery
performance or battery life .
5.If you don't use it for a long time , ensure that the battery level is above 50% ,
and then store it safely. It is recommended to store the product in indoor
warehouse with humidity less than 75% at 25℃ to minimize the capacity
attenuation of the battery cell. During the transportation, the
products should be protected from rain and water, and should not
be kept in high temperature environment for a long time.