Coleman 90508E Owner's Manual
Coleman 90508E Owner's Manual

Coleman 90508E Owner's Manual

110-120v 60hz, 12a at 68f (20c)

Advertisement

90508E 90524E 90363E
110-120V~ 60Hz, 12A at 68°F (20°C)
Coleman
OWNER'S MANUAL
DO NOT RETURN THIS ITEM TO THE STORE OR
WEBSITE WHERE IT WAS PURCHASED.
PLEASE VISIT BESTWAYUSA.COM/SUPPORT
FOR QUESTIONS, OR FOR DEFECTIVE OR
WARRANTY CLAIMS.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 90508E and is the answer not in the manual?

Questions and answers

Summary of Contents for Coleman 90508E

  • Page 1 90508E 90524E 90363E 110-120V~ 60Hz, 12A at 68°F (20°C) Coleman OWNER’S MANUAL DO NOT RETURN THIS ITEM TO THE STORE OR WEBSITE WHERE IT WAS PURCHASED. PLEASE VISIT BESTWAYUSA.COM/SUPPORT FOR QUESTIONS, OR FOR DEFECTIVE OR WARRANTY CLAIMS.
  • Page 2 OWNER’S MANUAL S100105/S100205 WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? Visit the Bestway For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwayusa.com/support YouTube channel CONTENTS IMPORTANT SAFETY INSTRUCTIONS PG 002 PRE-SETUP PG 009 INSTALLATION PG 012 USING THE SPA...
  • Page 3: Important Safety Instructions

    WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS. WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. A wire connector is provided on this unit to connect a minimum 8 AWG (8.37 mm solid copper conductor between this unit and any metal equipment, metal enclosures of electrical equipment, metal water pipe, or conduit within 5 feet (1.5 m) of the unit.
  • Page 4 f ) Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medication may affect heart rate, blood pressure, and circulation. WARNING: To avoid electric shock, do not use the spa during storms in case of thundering or lighting.
  • Page 5 may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
  • Page 6: Supplier's Declaration Of Conformity

    Supplier's Declaration of Conformity Under FCC Part 15 SDoC Procedure Product Description : SPA Model Number : S100105 / S100205 Trade Name : Bestway Responsible Party in USA : Bestway (USA) Inc. 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Testing Laboratory : Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North),Caohejing...
  • Page 7 SPA SUCTION FITTING INSTRUCTIONS When installing and using this equipment, basic safety precautions shall always be followed, including the following: IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS. • Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
  • Page 8 • These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool is open to bathers. • Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the finished surface of the pool in which the SOFA is installed. Installation Information label (Copy) Manufacturers name: Bestway (Nantong) Recreation Corp.
  • Page 9 PRE-SETUP CHECK LIST To check the parts printed inside the manual, verify that the equipment components represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase, visit our website bestwayusa.com/support.
  • Page 10 • The selected location must not have overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or cables of any kind. • The selected position must be far from the house entrance. Do not position any equipment or other furniture around the spa.
  • Page 11: Outdoor Installation

    Outdoor Installation: • The selected surface must be clear of aggressive plants and weed species. Those types of strong vegetation could grow through the liner and create water or air leakage. The grass or other vegetation that may cause odor or slime to develop have to be eliminated from the set-up location.
  • Page 12: Installation

    INSTALLATION For the installation instructions, follow the drawings printed inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. RECOMMENDATIONS DURING THE INSTALLATION • Use of an extension cord or multi-plug adaptor with the spa heater is dangerous and can cause the plug to overheat, causing damage to the equipment and surrounding items.
  • Page 13 TEMPERATURE ADJUSTMENT BUTTONS:Pressing CELSIUS/FAHRENHEIT TOGGLE:The temperature button, the display starts to flash showing can be displayed in either Fahrenheit or Celsius. the set temperature for 3 seconds, after that it will show again to the real water temperature. When it is flashing you can adjust the temperature using the button.
  • Page 14: Maintenance

    MAINTENANCE CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death. LINER • It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner. •...
  • Page 15: Troubleshooting

    TROUBLESHOOTING Problems Probable Causes Solutions Pump does not operate - Power failure - Check power source - Power circuits is broken - For assistance, please visit the support section on our website, www.bestwayusa.com Pump does not heat - Temperature set too low - Set spa to a higher temperature;...
  • Page 16 ONLY FOR SPA EQUIPPED WITH Wi-Fi Problems Probable Causes Solutions The pump has been connected to the If the router your pump is connected to is dual-band and currently not wrong band connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair pump heater again.
  • Page 17 ERROR CODES CAUSES REASONS SOLUTIONS The water flow sensors work without 1. The water flow sensor flags didn’t fall back into the 1. Unplug the plug gently, strike the side of the pump but not violently, and plug it pressing the filter or heat button. correct position.
  • Page 18 90508E 90524E 90363E...
  • Page 19 < 50°F(10°C) > 59°F(15°C) > 59°F(15°C) RESET RESET RESET TEST TEST TEST...
  • Page 21 RESET RESET RESET TEST TEST TEST...
  • Page 22 A: 1.
  • Page 24 ©2023 The Coleman Company, Inc. Coleman is a registered trademark of The Coleman Company, Inc., used under license. ® Manufactured by Bestway ® ©2023 Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Trademarks used in some countries under license from Bestway Inflatables &...

This manual is also suitable for:

90524e90363e

Table of Contents