Advertisement
Quick Links
Operating Manual
W410 Disc Sander
1. The W410 12" (300MM) Disc Sander
2. Fitting the sanding disc
3. Fitting the Flywheel ands sanding disc
4. Assembling the fence
5. Spare sanding discs
6. Safety Notes
7. Parts List
8. Exploded View
Page 1
page 2
page 2
page 2
page 2
page 2
page 3
page 4
page 4
Advertisement
Summary of Contents for Framers Corner charnwood W410
- Page 1 Operating Manual W410 Disc Sander 1. The W410 12” (300MM) Disc Sander page 2 2. Fitting the sanding disc page 2 3. Fitting the Flywheel ands sanding disc page 2 4. Assembling the fence page 2 5. Spare sanding discs page 2 6.
- Page 2 1. The W410 12” (300mm) disc sander. With no electrical requirement, the W410 is suitable for use any- where; from the workshop to the garden, from the craft bench to the school, from the van to the boat. Being hand operated makes it safe, safe for children and people of all ages but always read the safety instructions.
- Page 3 6. Safety Notes i. Set the angle required with the setting gauge for 45 and 90 degrees or use the setting lines as a guide. For other angles always check with a protractor. ii. Always keep the work surfaces clean. iii.Children should use the W410 only under supervision.
- Page 4 Parts List Flywheel Handle Table Support A Hexagon Screw M10 x 16 Hexagun Nut M6 Washer Work Table Spindle Fence Bush Fence Setting Piece Flywheel Fence Clamp Sanding Disc Fence Handle Hexagon Screw M6 x 12 Table Support B Locking Plate page 4...
Need help?
Do you have a question about the charnwood W410 and is the answer not in the manual?
Questions and answers