Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Winncare PRIMA FORM
Summary of Contents for Winncare PRIMA FORM
- Page 1 WINNCARE France Technical Manual TM_CUSHION_EN, 25/03/2024 - 1 -...
-
Page 2: Table Of Contents
WINNCARE France TABLE OF CONTENTS TECHNICAL CHARACTERISTICS OF THE DEVICE ................... - 3 - COMPATIBLES ACCESSORIES ........................ - 4 - PRECAUTIONS FOR USE/ WARNINGS..................... - 4 - PREVENTIVE MAINTENANCE ......................... - 5 - CARE AND DISINFECTION ........................- 5 - Cleaning the cover ......................... -
Page 3: Technical Characteristics Of The Device
57% polyurethane, 43% polyester – fire classification Anti-slip CRIB 5 Fire resistance test EN 597-1 & EN 597-2 Technical data (PRIMA FORM & KALLI VISCO) Viscoelastic foam Polyurethane 80 kg/m – fire classification M4 60% polyurethane, 40% polyester, weight 120 g/m² –... -
Page 4: Compatibles Accessories
57% polyurethane, 43% polyester – fire classification Anti-slip CRIB 5 Maximum pressure before aging at maximum weight (100 kg), for PRIMA FORM and PRIMA PLOT: Buttocks: 172 g/cm² (126 mmHg). Maximum pressure before aging at maximum weight (130 kg), for KALLI VISCO: Buttocks: 169 g/cm²... -
Page 5: Preventive Maintenance
WINNCARE France Check the position of the pelvis, the spine, the head, the height of the armrests and the length of the leg and footrests after the patient has been placed on the cushion. A cushion alone is not enough to prevent pressure ulcers/injuries; other preventive... -
Page 6: Caution
WINNCARE France Do not dry clean. The following conditions must be respected for 3D mesh and JERSEY covers: Moderate wash up to 40°C. Prohibited bleaching. Trumble dry on low heat. Do not iron. Do not dry clean. AUTION Do not use corrosive cleaning products or industrial degreasers to avoid damage to the textile. - Page 7 WINNCARE France 4, Le Pas du Château 85670 SAINT-PAUL-MONT-PENIT FRANCE WINNCARE France Zone Actipole, 2 Rue de Saint-Coulban 35590 MINIAC-MORVAN – France FRANCE ARMAOUEST Industries Zone Actipole 2 Rue de Saint-Coulban Tél. : +33 (0)4.66.02.15.15 35590 MINIAC-MORVAN – France Fax. : 33 (0) 4.66.02.15.00...
Need help?
Do you have a question about the PRIMA FORM and is the answer not in the manual?
Questions and answers