Smittybilt 99210-2 Installation Instructions

WWW.SMITTYBILT.COM
Please read instructions entirely before attempting to install and use this product.
Parts Included
Air Tank
10 mm hose
4 mm hose
Gauge
Gauge bracket w/screws
8mm bolts, washers, nuts
Drain plug (twist style)
Port plug
Import dis-connect
1. Make sure to apply sealing tape to all fittings.
2. Before installing or assembling determine the location of the tank and gauge.
3. The tank can be mounted in different positions, make sure the drain plug is mounted at the
bottom/lowest point.
4. Drain tank monthly.
Make sure to regularly check connections, fittings and tank for possible leaks or damage.
Make sure to dis-connect the air hose too the tank to depressurize it before using your
winch.
Make sure all hoses remain clear from any obstructions, moving parts and extreme heat.
For Technical Support/Warranty Information please call 310-762-9944
Qty
1
1 roll
1 roll
1
1
4 ea
1
2
1
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
2.5lb Air Tank
Part # 99210-2
Parts Included
90 degree "L" fitting
Sealing tape
4mm push-in fitting (male)
4mm push-in fitting (female)
10mm push-in fitting
Quick connect stud (female)
Quick dis-connect
Male-male connector
NOTE:
Universal
Qty
1 roll
2
1
1
1
1
1
4