Using The Wireless Adapter - TRENDnet TEW-423PI Quick Installation Manual

3. Using the Wireless Adapter

Windows 7 / Vista / XP / 2000
Note: Windows XP Wireless Zero Configuration utility must first be disabled. Please
refer to question 4 of the Troubleshooting section.
1. On the bottom right-hand corner of the screen,
double-click the Wireless Adapter Configuration
Utility icon.
2. Click Site Survey. Select the desired wireless
network and then click Connect.
3. If Encryption is enabled on your access point,
select the Authentication and Encryption enter
the encryption key and then click Apply.
Windows ME / 98SE
1. On the bottom right-hand corner of the screen,
double-click on the Wireless Adapter
Configuration Utility icon
2. Click Site Survey.
4