Lucci LEDlux Aura 190786 Installation Instructions

Installation Instructions
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.
Warranty
• This product is covered by a 3-year warranty. The warranty is from date of purchase, not the date of installation.
• If the product is not assembled and installed by a licensed electrician, the warranty will be void.
• Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
•
Warranty will be void if there is any damage due to improper usage or modification to the product.
•
Stains and damage caused by spills and leaks will not be covered by warranty.
• This product is not suitable for use with dimmer switches. Warranty will be void if the product is used on the same
circuit, which has a dimmer switch.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
This product must be assembled and installed by a licensed electrician.
•
All wiring and installation of the product must adhere to the latest local and national wiring rules.
E.g. AS/NZS 3000 Electrical Installations.
•
This is a Class II product and must be maintained during wiring and installation.
•
Select a suitable location for installation:
This product is suitable for indoor use only.
-
The mounting point must support 2 times the weight of the product.
-
This product is rated against water penetration to IP44 standards, which is water splashing from any direction.
-
Ensure the product is not installed in direct line of an air vent/system.
-
If installing the product in an area prone to moisture, ensure that the area is well ventilated, and an appropriately
-
rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as
such is not covered under warranty.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the product has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
• Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
• The following tools (not included) are required for installation:
Tape measure
-
Hammer
-
Screwdriver
-
Drill
-
Spirit level
-
NOTE: Due to the size/weight of the product, two people will be required to lift it up during the
installation process.
1 | P a g e
AURA MIRROR/CABINET WITH LED BACKLIGHT
Rated Voltage 220-240V~ 50Hz
SKU# 190786
v 1 . 0 ( 0 4 / 2 0 2 2 )