Granite MTB Installation And Use Manual

Thank you for purchasing the SCOPE COMPUTER MOUNT CONVERTER.
Please read these instructions thoroughly before attempting to install this item.
Proper installation is required for safe riding. Contact us or a bike mechanic if you are not sure with certain steps.
TOOLS REQUIRED
． Hex key 1.5mm
． Hex key 4mm
CONTENTS
． Converter cap
． Plastic mount for Bryton
． Plastic mount for Garmin / Wahoo
SCOPE MOUNT OPTIONS
Garmin
SCOPE MOUNT INSTALLATION
1. Remove the multi-tool from the SWAT housing.
3. Remove the SWAT tool housing by loosening the M5 bolts at the bottom of
the steerer tube.
． Hex key 2mm
． Hex key 5mm
1 PC ． 3mm stainless balls
1 PC ． M3 countersunk screw
1 PC
． M4 countersunk screw
Wahoo
2. Loosen the stem bolts that clamp the steerer tube.
4. Loosen the M3 set screw with the 1.5mm Hex key; then use the 2mm Hex key
SCOPE COMPUTER MOUNT CONVERTER
． Hex key 2.5mm
to remove the M4 bolt from the top cap.
INSTALLATION AND USE
2 PCS
1 PC
1 PC
Bryton
SCOPE COMPUTER MOUNT CONVERTER 2021.03.15 / REV. 0
WWW.GRANITE-DESIGN.COM