Safehub SEB-2001 Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Safehub SEB-2001 Installation Guide

The Safehub SEB-2001 sensor provides clients with near real-time, building-specific earthquake

damage information to expedite emergency response and recovery. Using easy-to-install

devices combined with advanced data analytics, Safehub calculates damage estimates for

individual buildings and portfolios in near real time after an earthquake. Through the

cloud-based Safehub Platform, users have access to actionable data, via text/email alerts and a

web dashboard, that enable them to prioritize building assessments, focus resources, and

resume operations as quickly as possible.

This installation guide provides information on how to install a Safehub sensor into a building.

Prior to installation, clients should discuss with Safehub the appropriate number of devices to be

installed in a building and the optimal device locations.

This guide outlines the steps required to install a single Safehub device.

Table of Contents

Need help?

Do you have a question about the SEB-2001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Safehub SEB-2001

Page 1 This installation guide provides information on how to install a Safehub sensor into a building. Prior to installation, clients should discuss with Safehub the appropriate number of devices to be installed in a building and the optimal device locations.
Page 2: Table Of Contents
Table of Contents An Overview of the Sensor Choosing the Location III. Sensor Installation and Pairing Resetting your Sensor Troubleshooting Standards Compliance VII. Safehub Limited Hardware Warranty...
Page 3: An Overview Of The Sensor
● Middle: Internal Battery Power - indicates internal battery strength ● Right: Power outlet light - indicates that the sensor is receiving power from an outlet Please note that the Safehub system is cellular-based, so the sensor does not connect to any of your internal networks.
Page 4: Choosing The Location
○ For Parametric Insurance Policies: ■ Safehub typically recommends 1-2 sensors on the ground floor or in the basement if one is present. ● The sensor should be installed on a solid wall or column, no higher than 12 inches or 30 cm above the floor.
Page 5 If the left cellular light does not turn green within 15 minutes, cellular connectivity may be too weak, and a better location will need to be selected. If you have any questions about your location selection, reach out to your Safehub representative for further guidance.
Page 6: Sensor Installation And Pairing
You should hear a “click” when the device is secured. Do not force the Safehub device into the bracket. If the device does not slide into place easily or no “click” is heard, check device orientation. See the illustration below.
Page 7 Pairing the Sensor: Once the mounting plate is secured, pair the sensor with the Safehub platform. Use your smartphone to scan the QR code on the back of the Safehub sensor. It will bring up a form with a few brief questions.
Page 8 ● Middle battery light should turn green once the internal battery is fully charged ● Right power light should be a solid white If you have any questions about installing or pairing the sensor, reach out to Safehub for further guidance.
Page 9: Resetting Your Sensor
Slide the Safehub sensor up to remove it from the mounting bracket, and unplug the power supply from the sensor. After a few seconds, you will hear a warning sound indicating that the sensor has been unplugged.
Page 10: Troubleshooting
If you find that is the case, you will need to plug the sensor into a different outlet, possibly relocating it. If you have any questions or encounter other issues with the sensor, reach out to your Safehub representative for further guidance.
Page 11: Safety Considerations
CANNOT INSERT DEVICE INTO MOUNTING BRACKET The mounting bracket has tabs at the top and bottom that will align with holes on the back of the device. If you are having trouble inserting the Safehub device into the mounting bracket, check the following: ●...
Page 12: Standards Compliance
The Safehub device is designed to minimize these hazards when it is installed and used according to the instructions in this document and according to commonly observed safety procedures. Follow all warnings in this document while unpacking, installing, operating, servicing, uninstalling, or repacking this device.
Page 13 It may not be suitable for other types of facilities including but not limited to selected types of residential, industrial, and medical environments. If there is any doubt about the suitability of the device's use in a particular location, contact Safehub. EU Regulatory Conformance Hereby, Safehub declares that the radio equipment type SEB-2001 is in compliance with Directive 2014/53/EU.
Page 14: Safehub Limited Hardware Warranty
Product to Safehub, to the facility or address provided by Safehub, and Safehub will test the Product and validate the claim. In the case of a validated claim, Safehub will, in its sole discretion and to the extent permitted by law, either repair your Product using new or refurbished parts or replace your Product with a new or refurbished Product at least as functionally equivalent to yours.