Quintex QX0203 Manual

Manual for QX0203 Potentiometer
Purpose of this Instruction
Working in hazardous areas, the safety of personnel and plant depends on
complying with all relevant safety regulations.
Assembly and maintenance staff working on installations therefore have a
particular responsibility. They require precise knowledge of the applicable standards
and regulations.
These instructions give a brief summary of the most important safety measures. It
supplements the corresponding regulations which the staff responsible must study.
SAFETY INSTRUCTIONS
Use the explosion-proof signal lamp with button module only
for its intended purpose.
Explosion-proof signal lamp with button module are not
suitable for Zone 0 hazardous areas!
Incorrect or impermissible use or non-compliance with these
instructions invalidates our warranty provision.
No changes to the device impairing its explosion protection
are permitted.
Use the explosion-proof signal lamp with button module only
if they are clean and undamaged.
Any damage can invalidate the Ex-protection.
Observe the following during installation and operation:
National safety regulations;
National accident prevention regulations;
National installation regulations(e.g. IEC 60079-14);
Generally recognized technical regulations;
Safety guidelines in these operating instructions;
Characteristic values given on the explosion-proof signal
lamp with button module.
Conformity to Standards
The explosion-proof signal lamp with button module.is designed
manufacturedand tested in accordance with ISO 9001. The
explosion-proof signal lamp with button module complies with
the following regulations and standards:
IEC60079-0 : 2007 IEC60079-1 : 2007 IEC60079-7 : 2006
EN60079-0 : 2009 EN60079-1 : 2007 EN60079-7 : 2007