Network Settings - Dukane ImagePro 8755G-RJ User Manual

Configuring and Controlling the Projector via a Web Browser

Network Settings

Displays and configures network settings.
Item
IP Configuration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default Gateway
Projector Name
sysLocation (SNMP)
sysContact (SNMP)
DNS Server Address
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.

Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Numbers '0-9' and alphabet 'a-z',
'A-Z' and symbols can be used.
Configures the location to be referred to when using SNMP.
The length of the sysLocation can be up to 255 alphanumeric
characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can
be used.
Configures the contact information to be referred to when
using SNMP.
The length of the sysContact can be up to 255 alphanumeric
characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can
be used.
Configures the DNS server address.
Description