Comfast CF-WR633AX Quick Installation Manual page 7

�.� Managing interface Pairing
�.�.� Configuring the Management Terminal
�. Open the management page of the device as the management
terminal, and click to enter the My Mesh interface.
�. Click the Easymesh switch and go to the Easymesh Settings page.
�. Select Easymesh, set the role to "Manage", and click Save.
�.�.� Pairing the Mesh
Method �: Wired networking
�. Use a network cable to connect the LAN port of the management
device and the agent device, and wait for the connection.
�.�-� minutes later, refresh the page and display the connection
diagram (including the management side and the agent side), that is,
the pairing is successful.
You can remove the network cable.
manage
Do not disconnect the power supply while the configuration is taking effect