Jameson 31-L251R Operation & Safety Manual

tActicAl lighting
Rechargeable LED
INSTRUCTIONS
• Before use, connect the charger plug to a 100-240 V AC standard power source for charging.
The 4-bar battery indicator on the lamp's handle LCD will show 4 bars when it is fully charged.
• Press the power button to turn on the spot beam, press again within 5 seconds to turn on the
flood beam. Press the power button again to turn off the lamp.
• Use the +/- buttons to adjust the brightness for either beam in 25% increments.
• The unit will remember the power setting for each mode after it is powered off.
• If the unit is on for more than 5 seconds in the same mode, pressing the power button will
turn the unit off (it will not toggle to the other mode). Turning it on again, it will work in the same
mode it was when powered off.
• Low battery reminder: the light source will flash before the battery is depleted.
• To extend the lifespan, please ensure to charge the battery every 3 months when not in
frequent use.
• Maintain the lid on the charging port tightly secured when not charging the unit to ensure
watertightness.
WARNINGS / BATTERY TIPS
• Avoid looking directly into the beam of light
• Do not use the lamp near a naked flame
• Recharge frequently
• Do not leave the battery without charge for an extended period - Deep discharge risks
damaging the battery
• The light source of this luminaire is not replaceable; when the light source reaches its end of
life, dispose of the product properly
• Maintain a minimum distance of 0.1m (4") from light source to any obstruction (else energy
emitted might be a hazard).
• The unit has no user-serviceable parts. Do not open.
SPOT
OPERATION &
SAFETY MANUAL
2
|
800.346.1956 TACTICAL-LIGHTING.COM
31-L251R
FLOOD
YEAR
WARRANTY