Altronics Z6317 Instructions Manual

Z6317 - HIGH PRECISION TEMPERATURE CONTROL MODULE
DESCRIPTION
The W1209 is a low cost yet highly functional self-contained temperature controller module
for both heating and cooling applications.
PACKAGE INCLUDES:
•
W1209 Temperature Controller Module
•
45cm (18") long temperature sensor probe
KEY FEATURES OF W1209 TEMPERATURE CONTROLLER
MODULE:
•
3-digit display of temperature
•
Module can operate in a heating or cooling mode of operation
•
Multiple parameters can be set such as temp trip point, hysteresis and delay.
•
Waterproof NTC temperature sensor has -30 to +110°C measurement range
with 0.1°C accuracy
•
Relay switches up to 120VAC @ 10A or 14VDC @ 10A
•
12V module operation
This module measures and displays the temperature and allows you to control power to
most types of electrical equipment based on that temperature. A single output relay can
be turned ON or turned OFF as temperature rises or lowers past a thermal threshold that
you set. You can also set a temperature hysteresis, relay activation delay and thermal
limits for the modules operation.
A built in STM8S or similar MCU allows you to configure the module using the display and
3 pushbuttons. All settings are saved into non-volatile memory and are preserved during
a power cycle.
The temperature is sensed by a high accuracy waterproof NTC 10K Thermistor that has a
range of -30°C to 110°C (-22°F to 230°F) . The sensor cable is about 18" long, but it is
possible to splice wire to lengthen the cable if needed.
The relay is rated for up to 120VAC @ 10A and 14VDC @ 10A. When the relay is
energized a red LED is lit.
higher power relays if you want to control a lot of power.
Module Power
It is also possible to use the relay on this module to switch