Do you have a question about the LM003 and is the answer not in the manual?
Questions and answers
Theresa Stefanski
April 8, 2025
The unit started beeping periodically about 24 hours ago. It is just a single beep and does not happen in a pattern that we can detect. It is not in use at this time.
1 comments:
Mr. Anderson
April 9, 2025
The O3 Waterworks LM003 unit may be beeping periodically when not in use because the automatic dryer cycle is running too frequently due to the room's relative humidity being over 50%.
This answer is automatically generated
Dale L Lauver
April 22, 2025
my wash machine is giving me a 4C code, water supply issue
Summary of Contents for O3 Waterworks LM003
Page 1
E N H A N C E D O X Y G E N L A U N D R Y S O L U T I O N USER MANUAL Models: LM003 LM510 Plus (Pictured Above) clean with the...
OV E RV I E W Product Overview..............3 Installation Overview...............4 Installation Instructions............5 How it works................9 Operating Instructions............10 Frequently Asked Questions..........11 Troubleshooting Guide............18 Warranty & Parts..............20 Manufactured by: o3waterworks, LLC. 207 Byers Creek Road Suite A Mooresville, NC 28117 For support, contact: support@o3waterworks.com # 11,505,887 Model: LM510...
P RO D U CT OV E RV I E W Mixer Dehumidifer Control Window Window Panel Power Cooling Plug Vents Normal Mode Boost Mode No O Mode Dehumidifier (Red) (Blue) (Green) (Orange) Run dehumidifier cycle when dessicant balls inside Choose for normal Choose for Choose to run...
Page 4
STA N DA R D I N STA L L AT I O N No plumber or electrician required Connect new hose Connect new hose Plug power from cold water from OUT fitting to pack cord into supply tap to cold water IN fitting standard waterworks...
Page 5
I N STA L L AT I O N W I T H ST E A M D RY E R No plumber or electrician required...
Page 6
I N STA L L AT I O N W I T H S P L I T T E R For LM510 Plus Models Use when water pressure is not strong enough to activate bubbles, or can't see bubbles in mixer Connect splitter to Connect hose Turn off hot...
Page 7
I N STA L L AT I O N W I T H S P L I T T E R For LM510 Plus Models Use with an accessory hose to fill larger receptacles with ozonated water. Connect splitter to Connect hose Plug power OUT fitting, 1 line to...
(estimated install I N STA L L AT I O N I N ST R U CT I O N S time 15-20 mins) For Drywall Applications Parts Included: Stainless steel Wall Bracket Anchors (x3) Splitter 12v DC Power Hose (x2) (LM510 Adaptor Plus Only)
NOTE: Leave the hot water supply hose connected to the wall valves and the washing machine as normally configured. With the hoses attached and water supply valves turned off, lift the O3waterworks unit and lower down onto the Wall Bracket until firmly seated.
O P E R AT I N G I N ST R U CT I O N S When you begin the wash cycle on your washing machine, the o3waterworks system will automatically start in "Normal Mode" and deliver the factory preset amount of enhanced oxygen into your washing machine.
F R EQ U E N T LY AS K E D Q U EST I O N S Is the O waterworks system safe for colors? Yes. Most colored fabrics are safe to be laundered even in the powerful "Boost" mode setting. However, on rare occasions, organic based dyes and dyes with improper colorfastness have been known to fade.
Page 12
F R EQ U E N T LY AS K E D Q U EST I O N S Should I use the extra rinse cycle? Yes. It is recommended to use the cold water extra rinse cycle, if your washer has this feature. This is especially useful for low flow high efficiency machines that use very little water in the wash and rinse cycle.
Page 13
F R EQ U E N T LY AS K E D Q U EST I O N S I can smell the enhanced oxygen while the machine is running, is it bad for me? No. The ozone levels generated by the O waterworks system are not high enough to be harmful to the respiratory system of humans or pets.
Page 14
F R EQ U E N T LY AS K E D Q U EST I O N S How does the O waterworks system reduce pollution? The O3waterworks laundry system can help reduce pollution in the following ways: Eliminating the need for chemical detergents, so they are not introduced into local water resources.
Page 15
F R EQ U E N T LY AS K E D Q U EST I O N S Can the water from the O waterworks system be used for washing pets? Yes. It is ok for the treated water from the O waterworks system to be used for cleaning pets.
Page 16
F R EQ U E N T LY AS K E D Q U EST I O N S Do I need a plumber or electrician to install? No. The O waterworks laundry system installs on the wall, near your washing machine. It comes with a simple to install mounting bracket, and set of water hoses.
Page 17
F R EQ U E N T LY AS K E D Q U EST I O N S Is using enhanced oxygen for washing clothes a new technology? No. Actually, many hospitals and major brand hotels have been using a similar type of technology for nearly 20 years. waterworks has re-engineered this expensive and complicated industrial process, and turned it into a convenient, yet effective tool for residential use.
T RO U B L ES H O OT I N G G U I D E Problem Possible cause Solution I turned on my washer Water is not being Make sure both Hot and Cold water supply and no water is running, supplied to the hoses are attached to the washing machine, or I can't see the...
Page 19
T RO U B L ES H O OT I N G G U I D E Problem Possible cause Solution Humming or The built-in This is a normal function. The system will dehumidifier is automatically run a dehumidifier cycle motor noise from running up to a 2 to keep the oxidizing module running...
Page 20
# 11,505,887 Manufactured by: o3waterworks, LLC. 207 Byers Creek Road Suite A Mooresville, NC 28117 For support, contact: support@o3waterworks.com Models: LM003 LM510...
Need help?
Do you have a question about the LM003 and is the answer not in the manual?
Questions and answers
The unit started beeping periodically about 24 hours ago. It is just a single beep and does not happen in a pattern that we can detect. It is not in use at this time.
The O3 Waterworks LM003 unit may be beeping periodically when not in use because the automatic dryer cycle is running too frequently due to the room's relative humidity being over 50%.
This answer is automatically generated
my wash machine is giving me a 4C code, water supply issue