Denon AVR-889 Owner's Manual page 56

ENGLISH
Other Operations and Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2/REC SELECT>
[Front]
uiop
[Rear]
uiop

Other Operations
BUTTON
Recording on an External Equipment
<BUTTON>
(REC OUT mode)
[BUTTON]
You can listen to one program source while recording a different
program source.
ui
1
<ZONE2/REC SELECT>
Press
"ZONE2 Source" is shown on the display.
2
<SOURCE SELECT>
Turn
displayed.
The "
ZONE2 Source
RECOUT SIRIUS
<SELECT/ENTER>,
3
op <SOURCE SELECT>
Turn
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
47).
[CH SELECT/
ENTER] 5
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
[CH SELECT/
ENTER]
.
until "RECOUT Source" is
" indicator lights.
ZONE2 TUNER ···· ZONE2 SIRIUS
······ RECOUT TUNER RECOUT Source
to choose the input source
<ZONE2/REC SELECT>
• To cancel, press
SELECT>
until "ZONE2 Source" is displayed.
• Make a test recording before starting the actual recording.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
• The "XM" digital audio output signals are not output from the
OPTICAL2 output connector.
NOTE
• Digital signals are not output from the analog REC OUT connector.
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
<SOURCE
, then turn