Read and understand instructions before using equipment! Do not throw away instructions! Always verify the latest revision of the Safewaze Manual is being utilized. Visit the Safewaze website, or contact Customer Service, for updated manuals. IMPORTANT: • Please refer to this manual for essential instructions on the use, care, or suitability of this equipment for your application.
Page 3
Women who are pregnant and individuals considered minors must not use any Safewaze equipment. • Do not alter or misuse equipment. Only Safewaze, or entities authorized in writing by Safewaze, may make repairs to Safewaze fall protection equipment.
3. 3,100 lbs. for Rescue applications. When more than one fall arrest system is attached to an anchorage, the strengths set forth in one of the above shall be multiplied by the number of systems attached to the anchorage. V2. 2024 Copyright Safewaze: 220-00024...
7.0 PRODUCT SPECIFICATIONS • 6:1 Gear Ratio • Fall Arrest Connector: Load-Indicating Swivel Snap Hook • 019-11007 Product Weight: 35.7 lbs. (16.2 kg) • 019-11008 Product Weight: 39 lbs. (17.7 kg) • Maximum Operation Force: 30 lbs. (13.6 kg) • Maximum Weight Capacity: ANSI 130-310 lbs. (59-141 kg) and OSHA up to 420 lbs.
Note: Numbers used in these examples are based on ZERO offset and setback with the anchor directly overhead or below, to represent an in- line Fall Clearance calculation. Consult with a Competent Person when working in different scenarios and when using non-Safewaze equipment. V2. 2024 Copyright Safewaze: 220-00024...
Page 9
CLASS 1/CLASS 2 (OVERHEAD) EXAMPLE CLASS 1 OVERHEAD HEIGHT OF ANCHOR EXAMPLE WORKING SURFACE ARREST DISTANCE 3.5' 42" MAX. PER ANSI Z359.14-2021 CLASS 1 HARNESS STRETCH 1.5' 18" MAX. PER ANSI Z359.11-2021 SAFETY FACTOR SWING FALL DROP DISTANCE V2. 2024 Copyright Safewaze: 220-00024...
► ► 9.0 COMPATIBILITY OF CONNECTORS • Safewaze equipment is designed for, and tested with, associated Safewaze components or systems. If substitutions or replacements are made, ensure all components meet the applicable ANSI requirements. Read and follow manufacturer’s instructions for all components and subsystems in your PFAS. Not following this guidance may jeopardize compatibility of equipment and possibly affect the safety and reliability of the system.
Ensure all connectors are fully closed and locked. Safewaze connectors (hooks, carabiners, and D-rings) are designed to be used only as specified in each product’s manual. See Figure 3 for examples of inappropriate connections.
FIGURE 4: INCORRECT DEVICE INSTALLATION Do not mount device on interior sleeve of a tripod leg. Exterior Sleeve 3-WAY SELF RETRACTING 3-WAY SELF RETRACTING LANYARD LANYARD ANSI Z359.14-2021, ANSI Z359.4-2013 OSHA 1910.140, OSHA 1910.66 OSHA 1926.502 470-00145 Interior Sleeve V2. 2024 Copyright Safewaze: 220-00024...
Page 13
*Note: The proper detent pin will match the mounting bracket hole size. The device lifeline can now be routed through an appropriate rigging location. Refer to the manual of the installation location (7' Adjustable Tripod, 10' Tech Tripod, etc.) for rigging steps. V2. 2024 Copyright Safewaze: 220-00024...
The user must keep instructions available for reference and record the date of first use on Page 2. The user must immediately remove the system from service if defects or damage are found, if visual fall indicator is deployed, or if exposed to forces of fall arrest. V2. 2024 Copyright Safewaze: 220-00024...
Page 15
Outdoor Use, All Construction, Annually Temperatures, Utilities, Warehouse Clean or Dusty Environments Harsh Storage Conditions, Commercial Prolonged or Severe to Quarterly to Semi- Construction, Oil Continuous Continuous Annually and Gas, Mining Outdoor Use, All Temperatures, Dirty Environment V2. 2024 Copyright Safewaze: 220-00024...
Page 16
The user shall always wear gloves when inspecting the lifeline to prevent injury in the event of cable damage (Image 2). IMAGE 2: CABLE DAMAGE EXAMPLES IMAGE 3: PERSONNEL WINCH INSPECTION Label Handle Cable Lifeline Device Bracket Housing V2. 2024 Copyright Safewaze: 220-00024...
► ► 14.0 MAINTENANCE Repairs: Only Safewaze, or entities authorized in writing by Safewaze, may make repairs to Safewaze fall protection equipment. Cleaning: The device can be cleaned with water and mild soap. The user shall remove all dirt, possible corrosives, and contaminants from the system prior to, and after, each use.
The spring-loaded handle will move back into its resting place if the user lets go due to its spring-loaded feature. See product manual for additional warnings, appropriate installation and connection methods, and complete inspection procedures. DO NOT REMOVE THIS LABEL! 470-00334 V2. 2024 Copyright Safewaze: 220-00024...
Need help?
Do you have a question about the 019-11007 and is the answer not in the manual?
Questions and answers