Advertisement
Quick Links
Advertisement
Summary of Contents for tedee Smart relay module
- Page 1 Tedee smart relay module Installer’s manual...
-
Page 2: Preparation For Installation
Compatibility Both DC and AC power the Tedee smart relay module with a voltage range of 12-24V. It supports relay openers supplied with a 230V and up to 5A current. - Page 3 Installation tutorial The installation process of the Tedee smart relay module involves an electronic connection, to connect it with the online cloud service, and then integrate the systems with the Tedee application. Simply follow the steps below. Tedee smart relay module should be installed by qualified installers or electricians only.
- Page 4 Read the diagrams below, then proceed to install the relay module. Pay particular attention to the designation of the controller connectors. Connection Start by connecting the +12V or +24V power wire (red or black with a white dotted line) to the VIN port and the ground (black) to the COM port.
-
Page 5: Configuring Device
building or property. Ensure the device is connected properly according to the diagram and there are no metal components which may accidentally short-circuit. Now, start the device by turning on the power and turning on the main fuse or connecting the power cord to the power outlet. - Page 6 Begin adding a new device Start adding a new device by tapping a “+” icon in the top-right corner of the screen. Select “Add new device.” Choose “Add and set up a new device.” Connect to the relay module Make sure that your relay module is powered. Turn ‘data transfer’...
- Page 7 Add the device to your account Return to your wBox app. Close the integration tutorial window by pressing “X” in the top-left corner. Your app’s home window will show a message stating that you have connected to a new device and can add it to your account.
- Page 8 On your smartphone, disconnect from the module’s Wi-Fi network and connect to your local Wi-Fi – the same local network your smart relay module connects to. To prevent the access of unauthorised persons to your relay module, you must disable its own Wi-Fi network.
- Page 9 Any relay module will integrate with the Tedee app. Launch your Tedee app and log in to your Tedee account. If you still need to become a user, create a Tedee account.
-
Page 10: Factory Reset
At the bottom of the screen, you can go to the “Access sharing”, “Activity logs”, or “Settings” tabs to access additional features. Go to https://tedee.com for more information on how to use smart access features. - Page 11 Follow the reset sequence 1. Before turning the power back on, follow the reset sequence and keep track of the buttons you use. Start the sequence no more than 30 seconds after turning the power back on. If you don’t start the sequence in this period, turn the power off and back on again. 2.
Need help?
Do you have a question about the Smart relay module and is the answer not in the manual?
Questions and answers