OmniPower 19072024 Instructions

BEFORE USING THE POWER STATION
Scan the QR Code and follow the steps to
register the device and review the safety
and handling instructions.
FOLLOW THESE SAFETY PRECAUTIONS WHEN USING THE POWER STATION:
AVOID HIGH
TEMPERATURES
SETTING UP THE POWER STATION
Set up your Power Station on a hard, flat, stable
surface with good air ventilation around the unit.
Keep Power Station 10cm from walls, with a
minimum 30cm gap between each unit.
Avoid heat-prone areas. Optimal temperature
range is 10°C-40°C; maximum altitude: 2000m.
Install the Power Station in a dry location
away from humidity and moisture. Optimal
humitdity 30-70%.
STORING THE POWER STATION
Shut off the Power Station power,
disconnect the power cable and power
down the chargers.
If your Power Station or Portable Chargers
are not in use for more than a week, we
recommend turning them off.
Failure to follow these safety instructions can result in fire, electrical shock, injuries, or damage to your Power
Station or other property. Inappropriate use of the Power station may cause long term damage and may void the
Omnicharge warranty. For detailed warranty information and instructions on how to make a claim, please visit our
warranty policy page at https://omnicharge.co/warranty-policy/.
AVOID DIRECT DON'T PLACE IN
SUNLIGHT
AVOID FLAMMABLE
MATERIALS
CABINETS
CONNECTING THE POWER STATION
Maximum power: 450W. Use a suitable
socket and avoid overloading.
Use the original power cable only. Other
brands may damage your power station or
pose safety risks.
Avoid bending or crushing the power cable.
Don't place objects on it. Refrain from using
if damaged.
The Power Station must be grounded. Never
operate it without a properly installed ground
conductor.
Store the power station in a cool, dry place
with optimal temperature (10°C-40°C) and
humidity (30-70%).
Before cleaning, disconnect the Power
Station, remove Chargers, power them
off. Use dry cloth, avoid liquids.
Position Don't Avoid
Avoid using Avoid Avoid
on flat place in flammable in high contact direct
surface cabinets materials temperatures with liquids sunlight
Scan the QR Code for set up instructions
and register the Power Station. Serial Number PI ID
AVOID CONTACT
WITH LIQUIDS