Advertisement
DWL-G550 Install Guide
Network Type: The factory setting is set to Infrastructure. Ad-Hoc
mode is used for peer-to-peer networking.
Current Channel: Displays the channel information. By default, the
channel is set to 6 and selection is automatically determined by the
DWL-G550.
Server based Authentication: Displays if using 802.1x.
Data Encryption: Displays the current encryption level.
Signal Strength: Represents the wireless signal between
the access point and the DWL-G550. The percentage coincides with
the graphical bar.
After clicking Profile Management, you will see the following
screen.
Click Scan
Select an available
wireless network
Click Activate
D-Link Systems, Inc.
Appendix B (continued)
11
Advertisement
