D-Link DWL-AG132 Install Manual page 12

DWL-AG132 Install Guide Appendix B
SSID: The Service Set Identifier is the name assigned to the wireless
network.The factory SSID setting is set to default. Make changes here
to match the SSID on existing wireless router or access point.
Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc
mode is used for peer-to-peer networking.
Data Encryption: The default setting is set to Disabled. The adapter
supports WEP ad WPA, when encryption is enabled.
Authentication: Allows you to specify the authentication mode for
the network. The default setting is set to Open Authentication.
12
D-Link Systems, Inc.