PSP RoofTrac Installation Manual

W W ARNING
All Professional Solar Products (ProSolar) are engineered
and tested to withstand stated specifications (as stated on
published specification sheets) when installed properly. Fail-
ure to install properly may decrease the performance of in-
stallation.
SAFETY
All regional safety requirements should be followed when
installing Professional Solar Products. All tools and equip-
ment located on the roof should be secured to avoid falling
object hazards. All equipment/tools should be properly
maintained and inspected prior to use. Any exposed studs
should be protectively capped to help avoid injury.
This installation manual is intended for use by professional
installers with a working knowledge of construction princi-
ples.
Tool List
Chalk line
3/16" carbide masonry drill bit
3/8" masonry drill bit (for tile roof)
Cordless drill
Cordless impact wrench with 1/2" socket
COPYRIGHT PROFESSIONAL SOLAR PRODUCTS 2007: All information contained in this manual is property of Professional Solar Products
(PSP). TileTrac® is a registered trademark for PSP and is covered under U.S. patent #5,746,029. RoofTrac® and FastJack® is a registered
trademark for PSP and is covered under U.S. patent #6,360,491.
Installation Manual
APPLICATION:
The RoofTrac mounting system consists of sup-
port rails and top-down clamping hardware which
is integrated with either a TileTrac or FastJack
attachment device. The RoofTrac mounting sys-
tem can be utilized on virtually all standard con-
struction residential roof-tops, mounting 4' on
center, to install the majority of popular framed
solar modules.
Symbol Legend
Page 1 of 7
RoofTrac
Date Modified: 08/13/07
E E xplanation or Install Tip
Important product
performance information
Critical for Safety
®