Related Manuals for IKEUCHI CERJET VVP PP-IN Series
Summary of Contents for IKEUCHI CERJET VVP PP-IN Series
- Page 1 ＣＥＲＪＥＴ KKS030394-3E Instruction Manual Products VVP**PP-IN H. Ikeuchi & Co., Ltd. Kure Factory Hiroshima, Japan H. Ikeuchi & Co., Ltd.
- Page 2 VVP PP-IN (1) ＣＥＲＪＥＴ 1. Preface Thank you for purchasing CERJET® Spray Nozzles from H. Ikeuchi & Co., Ltd. This manual gives detailed instructions for the basic handling, maintenance and cautions of CERJET® Spray Nozzles. Prior to use, read this manual to familiarize yourself with the proper use of CERJET®...
- Page 3 ・Use the nozzles at a liquid pressure between 0.1 MPa to 2.0 MPa. The maximum pressure limit is 3.5 MPa, but not allowable for a long time use or repetitive spray operation. (Be careful of water hammer.) ・Store the nozzle in a clean, dust-free place. H. Ikeuchi & Co., Ltd.
- Page 4 (Ultrasonic cleaning, air blowing, etc.) Liquid leaks. Deterioration of Replace or change the sealing tape. sealing tape. Nozzles are not Tighten the nozzles properly with a firmly screwed in. torque wrench. H. Ikeuchi & Co., Ltd.
Need help?
Do you have a question about the CERJET VVP PP-IN Series and is the answer not in the manual?
Questions and answers