UTILIZZO DELLO SWITCHER SX-HUB 1. Collegare il caricabatteria all’ingresso del SX-HUB. 2. Collegare una, due o tre batteria alle uscite del SX-HUB utilizzando gli appositi cavi con le pinze oppure gli occhielli (non forniti assieme al SX-HUB). 3. Selezionare la batteria che si vuole caricare attivando l’uscita corrispondente. Per attivare l’uscita desiderata premere il tasto “CHANNEL”...
CONTROLLO TRAMITE APP • Lo switching HUB SX-HUB può essere gestito tramite App su sistemi Ap- ple iOS 8.0 o successivi e sistemi Android 4.4 o successivi. • Per installare la App cercare “AP charger 2.0” in App Store o Google Play.
SX-HUB is a switch with 3 outputs for AlcaPower SX series battery chargers. Using this device it is possible to connect and charge up to 3 batteries using one of the SX series chargers.
Among the control functions of the battery charger, those for controlling the SX-HUB are also made available. The control modes of the SX-HUB are: charging time for each output, auto- matic activation of the outputs sequentially or cyclically, charging mode of each output.
Page 8
Note: All pictures shown in this manual are for illustration purpose only, are not contractual and may differ from the actual product. Note: AlcaPower Distribuizione Srl reserves the right to make changes to this manual without prior notice and liability.
Need help?
Do you have a question about the SX-HUB and is the answer not in the manual?
Questions and answers