Initial Operation - Sharper Image EM9926B User Manual

A3: Channel number
A5: Remote sensor low battery indicate
B1: °C /°F unit transfer button
B3: Channel switch
C1: Transmit indicating lamp
C3: Wall mounting hole
C5: Battery compartment

Initial operation

 Open the weather station battery compartment cover V , Install 2 x AAA batteries correctly and pay attention to the
positive and negative directions.
 When you insert the batteries, the all icon on the LCD will light up for 3 seconds, and you will hear a beep tone, then
detect indoor temperature /humidity and pressure
 The Weather Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3
minutes and will display by a flashing reception RF signal symbol in the "OUTDOOR" display area on the receiver.
 This now, Open the remote Sensor battery compartment cover C2, Toggle the switch B3 to select the channel you
want，Insert 2 x AA batteries with correct polarity 【"+" and "–" marks】.
 After receiver has created a connection to the outdoor remote sensor, Pairing mode will exit after 3 minutes.
 Inserting the adapter DC plug into the product power socket 7 , plug the AC input of the adapter into the mains
socket of electricity.
 After the base is powered on, you can see that the mood light will go out after a demonstration.
Warning: do not use metal and other conductive objects to contact two power supply

EM9926B User Manuals
A4: Remote sensor humidity
B2: Manual transmitter button
C2: Battery compartment cover
C4: Stand cover