Section 3 - Configuration
This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be
used to test the status of the Internet.
Virtual Cable
VCT is an advanced feature that integrates a
Tester (VCT)
LAN cable tester on every Ethernet port on the
Info:
router. Through the graphical user interface
(GUI), VCT can be used to remotely diagnose
and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature
significantly reduces service calls and returns
by allowing users to easily troubleshoot their
cable connections.
Ping Test:
The Ping Test is used to send Ping packets
to test if a computer is on the Internet. Enter
the IP Address that you wish to Ping, and click
Ping.
D-Link DIR-605 User Manual
System Check
44