Related Manuals for seeed studio BG96-MT7688
Summary of Contents for seeed studio BG96-MT7688
- Page 1 Instruction manual of MT7688 BG96 module BG96MC-128-SGNS Room 332, building 2, innovation center, science and Innovation Park, Mianyang, Sichuan, China...
-
Page 2: Table Of Contents
Contents 1、 Overview ..........................1 2、 Hardware connection ......................1 3、 Binding pairing ........................2 4、 Instruction for 7688 ......................2 5、 F/W Update .........................3... -
Page 3: 1、Overview
1、Overview The functions of BG96-MT7688 model are WIFI、 cellular、 GPS. The detail image as Figure1. Figure1. 2、Hardware connection The use of BG96 module depends on the Main board and DVI board. Assemble as shown in Figure2. -
Page 4: 3、Binding Pairing
Figure2. 3、Binding pairing Using bind MT7688 with mainboard. 4、Instruction for 7688 Linking PC with 7688 first. Open network assistant NetAssist_v4.3.25. protocol type:Tcp Client Host address:192.168.12.10 Port:4444... -
Page 5: 5、F/W Update
AT test command: {"cmd":"at","payload":{"atcmd":"AT+CIMI","timeout_ms":300}} #Read SIM {"cmd":"at","payload":{"atcmd":"AT+CSQ","timeout_ms":300}} #Acquired signal quality {"cmd":"at","payload":{"atcmd":"AT+CREG?","timeout_ms":300}} #Obtain the network registration status {"cmd":"at","payload":{"atcmd":"AT+QGPS=1","timeout_ms":300}} #Open GPS {"cmd":"at","payload":{"atcmd":"AT+QGPS?","timeout_ms":300}} #Query GPS open or {"cmd":"at","payload":{"atcmd":"AT+QGPSLOC?","timeout_ms":300}} #Acquired GPS data {"cmd":"at","payload":{"atcmd":"AT+QGPSEND","timeout_ms":300}} #Close GPS 5、F/W Update 1) Use your PC to connect the Guardian-xxxx Wi-Fi (password CMIIC@123) and open the link (http://192.168.12.10 from a Browser (root passcode 12345678)) - Page 6 2) Select System-->Backup/Flash Firmware： 3) Check click file button Keep settings checkbox， as below: 4) Select mt7688 firmware and click open button as blew。...
- Page 7 5) Click Flash image button。 6) Click the Flash image button，wait the updating for a few minutes. 7) Please don’t power down and close the browser during updating. 8) You will see PC Wi-Fi is disconnected after updating and rebooting. A few minutes later, you can reconnect Guardian-xxxx Wi-Fi, if you can see login page in browser, the upgrade is successfully performed.
-
Page 8: Fcc Statement
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the BG96-MT7688 and is the answer not in the manual?
Questions and answers