IMT Ta-Pt100 Instruction Manual

I N S T R U C T I O N S H E E T
Analogue Ambient Temperature Sensors
Ta-Pt100 / Ta-Pt1000 / Ta-ext-Pt1000
Safety Instructions
The installation and assembly of electrical equipment must be carried out by electrically qualified persons.
The sensor may not be used with equipment whose direct or indirect purpose is to prevent death or injury,
or whose operation poses a risk to humans, animals or property.
Warranty and Liability
The sensor is designed for the measurement of ambient temperature. The warranty is for 1 year from the date of
the invoice for the intended use. IMT Technology does not accept any liability for possible losses or damage due to the
incorrect usage of the sensor. Liability for consequential damages is excluded.
Mounting Instructions
If mounted outdoors, avoid direct exposure to sunlight and rain to the sensor housing (INOX steel tube). For Ta-ext-Pt1000 if
necessary, provide protection from the sun and rain with the optional Shield-Tamb-Si.
The through holes used to fix the sensor to a stable and suitable surface shall be accessible when the housing is
opened. The tightening torque of the case cover is 180 Ncm.
When installing the sensor, the cables must be routed downwards from the housing.
Mounting direction Ta-ext-Pt1000:
Page 1/4 www.imt-technology.com