KSIX BXCD02US User Manual

ENGLISH – USER MANUAL
MOLECULE MULTI-SOCKET – BXCD02US
1. Characteristics
1.1 Technical specifications
Sockets: 2 ways socket-outlets
USB ports: 2 USB-A ports
Input: 16A / 250V
Output: Max. 3680W / 230V-
USB input: 180-250V~50 / 60Hz. Max0.30A
USB output: 5.0VDC 2.4A, Max. 12.0W
USB charge efficiency: 72.5%
USB charge No-load power consumption: 0.09W
Safety shutter included
1.2 In the box
1 x Molecule multi-socket
1 x Manual
2. Warnings
For your safety, please read the following precautions before
installing or using your device:
• Do not open the device or attempt to repair or service it.
• This device should be only used indoors.
• USB Charger: 5VD.C 2.4A (one port should not exceed 2.4
total output maximum from both USB outputs).
• Do not overload: Max. 16A 3680W.
• Do not operate when covered.
• Only for devices up to maximum output.
3. Maintenance recommendations
• Regularly clean the product with a dry cloth. The product
must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc.
to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or
bend it too strong.
• If the product includes a cable do not bend it too strong
and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away
from humidity.
• When not using the product, store it in a place free from
dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug
it immediately from any attached
power source or device it is connected to.
• Avoid dropping or hitting the product. It might be
damaged.
• Do not use the product for anything other than its intended
use.
• Please recycle the product in accordance with local
environmental laws and regulations.
4. Safety information
Please read the following instructions before using the
device for the first time:
• When you use device keep it away from heat sources (fire)
and from humidity sources (water
and other liquids).
• If the product is wet or damaged do not use it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable
materials.
• Do not expose the product to high temperatures (for
example: inside a car during hot weather).
• Do not throw the product into fire.