ENGLISH
Safety, Warranty & Regulatory Guide for Google Nest
Learning Thermostat and Nest Temperature Sensor
DEVICE ARBITRATION AGREEMENT INCLUDED (US Only)
This booklet provides important safety, regulatory, and warranty information that you should
read before using your Nest Learning Thermostat and Nest Temperature Sensor. You can find
an online version of this document at g.co/nest/support
Basic Safety
W ARNING: HEALTH AND SAFETY INFORMATION, READ BEFORE USE.
To avoid damaging your device, accessories, or any connected devices and to reduce the risk
of personal injury, discomfort, property damage or other potential hazards, follow the
precautions below and those found in the Nest Learning Thermostat and Nest Temperature
Sensor Safety Information at g.co/nest/support:
• Handle your Nest Learning Thermostat and Nest Temperature Sensor with care. You may
damage these devices or the battery if you disassemble, drop, bend, burn, crush or puncture
your devices. Do not use a device with a cracked screen or damaged enclosure. Using a
damaged device may cause overheating, fire, electric shock, injury or damage to your devices
or other property. Do not expose your devices to liquids, which can cause a short circuit and
overheating. Your devices are designed to operate in a dry, indoor environment and is not built
for outdoor use. Your device works best in ambient temperatures between 32° and 104° F
(0° and 40° C) and should be stored between ambient temperatures of -4° and 140° F (-20°
and 60° C). Do not expose the devices to temperatures above 140° F (60° C) as this may
damage the devices, overheat the battery, or pose a risk of fire.
• Your Nest Temperature Sensor is designed so that it can be wall-mounted.
See g.co/nest/nts2 for additional instructions on how to safely wall-mount your device.
PRODUCT INFORMATION
Nest Learning Thermostat
• Purpose of control: Thermostat, Timer
• Protection against electric shock: Independently Mounted Class III
• Surge immunity category: Installation Class 2 or Residential
• Pollution degree: 2
• Type of action: 1
• Rated impulse voltage: 0.33kV
• Temperature for the ball pressure test: 100° C
• ELV limits: 24 V~
Nest Temperature Sensor
• Purpose of control: Electronic Temperature Sensor (Operating Control – Non-safety related)
• Pollution Degree 2
• Type of action: 1
• Rated Impulse: 71Vpk
Need help?
Do you have a question about the GJQ8U and is the answer not in the manual?
Questions and answers