D-Link DSL-504 Quick Install Manual page 10

7 7
Configuring the DSL-504/CZ Configuring the DSL-504/CZ
Click PPPoA Configuration
on WAN in the left column.
Enter the Login User Name
and Password, provided to you
by your Internet Service
Provider (ISP.)
Authentication is set to detect
automatically. If your current
selection does not work, select
"pap."
Please be certain that
"enabled" is displayed in the
"Connect On Demand" field.
Click OK
Note: VPI: "0" and VCI: "35" settings are most common among DSL
providers. This will not work for others who have different VPI and
VCI settings. Please contact your service provider for the correct VPI
and VCI settings.
Make sure PVC settings
are entered correctly:
VPI: "0"
VCI: "35"
Click OK