STOREMORESTORE SMS-08-V39-SOB Assembly Manual

Open Back Shelves Assembly Guide
IT IS THE RESPONSIBILITY OF THE PERSON ASSEMBLING
THE SHELVING TO PROPERLY INSTALL ALL COMPONENTS
AND HARDWARE AS SPECIFIED IN THESE INSTRUCTIONS
AND ANY ACCOMPANYING DRAWINGS FOR SPECIFIC
INSTALLATION.
•
INSTALL ALL REQUIRED SIDE AND BACK SWAY BRACES
•
INSTALL FOOT PLATES AND SHIMS IF REQUIRED
•
INSTALL ALL UNITS PLUMB
•
TIGHTEN ALL HARDWARE SECURELY
GENERAL INSTRUCTIONS
1. These instructions are for the person who will actually
supeNise the assembly of the equipment covered by
your order.
2. Check material received against the packing list. First
check the number of packages received and then
check the contents of each package.
3.
Check material received for damage. If damaged,
secure a "damage notation" from the carrier.
4. Identify each part as it is unpacked and pile like parts
together and as close as possible to the working area
in which they are to be assembled.
5.
Lay out on the floor the space that each rack of
shelving is to occupy and build each rack in its proper
location.
6.
Be careful to use the correct hardware as specified in
the assembly instructions.
7.
Make sure units are plumb before tighting sway
braces and/or back panel bolts.
StoreMoreStore.com | 855-786-7667 | sales@storemorestore.com
SMS-08-V39-SOB
CAUTION
-- see
Please that they get them
--