Valeton VLP-200 Quick User Manual

Basic Tutorial for LOOP 1 and 2
Record, Play, Overdub and Delete
Recording
Perss Perss
Bottom track
"Bottom track": The first recorded track of a blank LOOP.
"Overdub": Overlay the second and subsequent recordings on top of the bottom track.
"Stop": Press twice to stop the LOOP only active when the LOOP is playing.
Additional Tips: Press and hold the MEMORY/SAVE knob to switch the current recording mode (only for bottom track) : manual recording (MR) and
automatic recording (AR). When switching to AR mode, after pressing the footswitch, LOOP will automatically start recording after detecting a certain
signal input.
Undo and Redo
Play
Overdub Perss
"Undo": Hold to Undo is only for the last overdub track, not for the bottom track.
Recording Length Tips
Bottom track Bottom track Bottom track
Play Perss Overdub 1
Recording length: The length of each overdub track of LOOP 1 or 2 can be controlled as an integer multiple of the length of its own bottom track.
This is a useful technique for creative players. The loop length of LOOP will be based on the longest overdub recording. (If the recording time is not
an integer multiple, after you pressing the footswitch to end recording, the footswitch light will turn blue and flash slowly until the recording ends
automatically at an integer multiple.)
Play
Perss Overdub Perss
Press
Stop
Hold
Twice
Press
Undo and the
Hold Hold
track goes on
Overdub 1
...
Overdub 2
Play
Delete LOOP
Play
Redo and the
track goes on
Overdub 1
Quick User Guide
Thank you for purchasing a VALETON product!
www.valeton.net