Prepara On Before Installa On The Scylla V2 - Jefftron SCYLLA GEARBOX V2 Installation Manual

Prepara on before installa on the Scylla V2

Remove and open the gearbox according to the
normal gun disassembly procedure.
Take out all the internals from the gearbox and clean
the grease and oil.
Check the gearbox for edges. Grind for smooth
surface to prevent Scylla damage.
Take out: cut off lever with its screw and spring. Take
out trigger contacts. They are not used with the
Scylla.
You can choose: if you
want, you can use this
mechanical arm to block
the trigger on the safe
posi on.
But it is not necessary,
because Scylla use
electronic safety to block firing, when is trigger pulled
on Safe posi on.
Scylla – V2 8 www.JeffTron.net