Subscribe to Our Youtube Channel
Summary of Contents for Schiedel ePURO
- Page 1 Electrostatic Particle Filter for Residential Appliances Installation, Operation, Maintenance and Servicing Manual www.schiedel.com/uk February 2023...
-
Page 2: Table Of Contents
Display as Master ePURO filter Inside Control: Schematic and Termi- Type Plate nal Block EC Declaration of Conformity Detailed view Terminal designation Fact Sheet ePURO filter Connection LED External 2 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 3: General Information
Please read these instructions carefully before installing the ePURO filter. • Before carrying out any work on the ePURO filter, the power supply must be disconnected (mains plug or fuse). • The installation may only be performed by authorized and competent personnel. -
Page 4: Operating Principle
Switch-on The ePURO filter switches on automatically when the exhaust gas temperature rises. It switches off when the temperature falls below a certain threshold. 4 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 5: Significance Of The Led-Signal
HV working Then red permanent Normal operation Standby Error (HV or T- Sensor) break break break green Permanent red green green HV on Magnet error Permanent green The latest version of this brochure is available online at www.schiedel.com/uk | 5... -
Page 6: Description Of The Epuro Filter
6. Hexagonal electrode holder (steel rod) 7. Electronic box mounting bracket 8. Extension pipe 9. T-piece connecting piece 10. Temperature sensor and cable holder 11. Flexible electrode 12. T-piece 13. Mounting bracket 6 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 7: Installation Instructions
Slide the loop of the support console (Part 2) over the extension pipe. Fix the support console to the masonry stack using the fixing brackets (Part 4b) The latest version of this brochure is available online at www.schiedel.com/uk | 7... - Page 8 When the electrode on the whole length is vertical, tighten all nuts with the open-end spanner (size 17). With a circular or metal saw, crop the 6-edged rod. 8 | The latest version of this brochure is available online at www.schiedel.com/uk...
- Page 9 The cable of the temperature sensor is installed The grub screw used to secure the hexagonal holder (steel rod) is tightened Inspection view: The electrode is positioned The plug is connected The latest version of this brochure is available online at www.schiedel.com/uk | 9...
- Page 10 Connect the plug to the electronic box. The LED blinks orange and then flashes green every 10 seconds if the ePURO filter is on stand-by mode. When the ePURO filter is in operation, the LED light is continuously green. Electrical installations must be performed by a qualified electrician.
-
Page 11: Led-Signal: Test Mode And Normal Mode
Normal operation Standby Error (HV or temperatur - sensor) break break break green green green Permanent red HV on Error m agnet Permanent green The latest version of this brochure is available online at www.schiedel.com/uk | 11... -
Page 12: Electrical Connection
General information The electrical installation must be performed by a qualified electrician. Pull out the plug from the ePURO filter so it is disconnected from the mains. Connector: 110V AC / 230 V AC / 0.2 A / 30W, 50 Hz Connection of the appliance plugs Check designation on the connector (L = conductor, N = neutral, earth conductor). -
Page 13: Electrical Connection Epuro Filter
The insolation switch must be accessible to the chimney sweep. chimney sweep. AFFIX THE "CAUTION! PARTICLE PRECIPITATOR!" ON THE INSPECTION DOOR. THE CHIMNEY SWEEP CAN UNPLUG THE EPURO FILTER WHEN CLEANING THE ROOF. The latest version of this brochure is available online at www.schiedel.com/uk | 13... -
Page 14: Electrical Specifications Led (Special Circuit Board, Optional, Only Indoor)
Inside Control: Schematic and Terminal Block Detailed view Terminal High voltage module Dip switch settings designation LED, operation indicator Terminal block Power supply unit Dip switch 14 | The latest version of this brochure is available online at www.schiedel.com/uk... - Page 15 7 – B: Reserve ModBus – LED internal in the housing cover 8 – 0V: Earthing LED intern 9 – LG: Connection green LED internal 10 – LR: Connection red LED internal The latest version of this brochure is available online at www.schiedel.com/uk | 15...
-
Page 16: Connection Led External
The OekoTube can be switched on or off via an external switch using terminals 14 + 15. The inputs must or may be wired with max. 24VDC. 16 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 17: Connection Epuro Filter With Display
24 VDC via terminals 11 + 14. Data communication takes place via the Modbus interface on terminals 3 + 4. Important: To activate the display, the settings on the dip switch must be made as described in chapter 0. The latest version of this brochure is available online at www.schiedel.com/uk | 17... -
Page 18: Electrical Connection Oekotube And Fan
Electrical connection OekoTube and fan Isolation switch 2 phases supply 2 separate isolation switches Circuit diagram Circuit diagram 18 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 19: Maintenance And Cleaning Of The Epuro Filter
Safety • Before you do any kind of work on the ePURO filter, switch it off (main plug, possibly by switch in the house). • The cleaning has to be performed only by a skilled and certified expert. -
Page 20: Cleaning From Above
Cleaning of the insulator, the tongues and the electronic box. Re-fix the cover (see point 2) Re-connect the device. Make sure that the LED changes blinking (interval every 10 sec.). 20 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 21: Fault Indication / Fault Reason
Wire inside the control box is not connected correctly Connect the wire right No power on the ACDC / ACDC defect Replace the control box Hexagonal bar is not trimmed to length Wrong Right The latest version of this brochure is available online at www.schiedel.com/uk | 21... -
Page 22: Missing Magnet, Or It Is Too Far Away From The Contact
Switch-on behaviour or switch-on temperature Setting Dip-Switches The ePURO filter is delivered with factory settings. No changes to the dip switches are necessary. Settings are to be made exclusively after consultation with the manufacturer or supplier. The information printed on the sticker on the inside of the cover of the control electronics applies. -
Page 23: Factory Setting
000 = (ON) Recommendation according to the cross-section of the flue pipe 130 mm 22 kV (factory setting) 150 mm 24 kV 180 mm and more 30 kV The latest version of this brochure is available online at www.schiedel.com/uk | 23... -
Page 24: Switch-On Behaviour
OTi ON bei ∆ 20°C +15 m in Addressing the HV modules Dipswitches 1-3 are reserved for addressing the digital interface. These are not relevant for the use of the ePURO filter and should be left at the factory settings. ePURO filter Settings Address U.limit [kV]... -
Page 25: Display As Master
Display as Master If a display is connected, then dip switch 4 must be set to OFF. The ePURO filter thus takes over the settings made on the display. ePURO filter Settings Address U.limit [kV] Temp. [°C] «111 = 31"... -
Page 26: Ec Declaration Of Conformity
Household and similar electrical appliances - Safety - EN 60335-1:2020 Part 1: General requirements Documentation officer: Beat Müller, Tel. +41 (0)81 511 63 00 Plons, in february 2021 Beat Müller, Managing Director 26 | The latest version of this brochure is available online at www.schiedel.com/uk... -
Page 27: Fact Sheet Epuro Filter
Max. Power consumption, W High voltage Max. Voltage electrode, V 30‘000 General information Sound pressure level, dB (A) Material Stainless steel 1.4404 (V4A) Max. Ambient temperature, °C The latest version of this brochure is available online at www.schiedel.com/uk | 27... - Page 28 Schiedel Isokern Unit 8/9 Block A, Holton Road, Holton Health Industrial Est., Poole BH16 6LG T +44 1202 861650 Follow us on Social Media @SchiedelUK sales.uk@schiedel.com www.schiedel.com/uk...
Need help?
Do you have a question about the ePURO and is the answer not in the manual?
Questions and answers