Table of Contents
Advertisement
System Instruction Manual
▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section
6-10.1).
Select COPY Mode
Only when the devices and medias are ready to copy, the Ready on the corresponding
devices and medias will be displayed.
NETWORK COPY
Save the recorded data in PC through the COMBO VIEWER by Network.
Click the Network button on the COMBO VIEWER to start copy. It is available only on
the COMBO VIEWER (not on the system) and the networking should be connected to
the system.
USB COPY
Save the recorded data in USB Device.
Click the USB Device button to start copy.
CD-RW COPY
Save the recorded data on CD-R/W Medias.
Click the CD-R/W button to start copy.
[Fig.6-44 End Copy Time Setup window]
68
Advertisement
Table of Contents
