Advertisement
Quick Links
DROP-IN
BATHS
HOUSTON | ATLANTA | MAISON | ODESSA
INSTALLATION INSTRUCTIONS
PRODUCT CARE INFORMATION & WARRANTY
IMPORTANT - Newtech recommends that a qualified tradesperson
install this product and that it is installed to a professional standard.
This product carries a 5 Year warranty against faulty workmanship
and materials. Please inspect product for damage before
installation.
Advertisement
Summary of Contents for Newtech HOUSTON Series
- Page 1 HOUSTON | ATLANTA | MAISON | ODESSA INSTALLATION INSTRUCTIONS PRODUCT CARE INFORMATION & WARRANTY IMPORTANT - Newtech recommends that a qualified tradesperson install this product and that it is installed to a professional standard. This product carries a 5 Year warranty against faulty workmanship and materials.
- Page 2 Once the connections are completed fill the bath tub with water, between the bath and side walls must be filled with silicone. The bath can be wait for 2 hours and check for any water leaks. used after 24 hours. 2 | Drop-In Baths Installation Guide www.newtech.co.nz...
- Page 3 Preparation Fixing Options CONSTRUCTION ADHESIVE 75X50 RAIL ON EDGE SHAPED TO SUPPORT BATH FLANGE MIN 15MM 15MM GAP FOR TILING Alternatively a light 50x50 frame and face can be constructed with suitable Important: Ensure the frame doesn’t make contact with the bath to prevent wall board e.g Villa board creaking.
- Page 4 • If your product gets scratched it may be restored by using a fine polish. If this doesn’t remove the scratch it can be cut back with a very fine wet and dry sandpaper used liberally with water. After removing the scratch restore gloss with Brasso. For further information please refer to the Newtech Warranty document at newtech.co.nz Head Office:...
Need help?
Do you have a question about the HOUSTON Series and is the answer not in the manual?
Questions and answers