Techly I-CASE USB31C-NVME Manual

EN
FEATURE
DESCRIPTION
Screw-less USB-C™ to NVMe/SATA
M.2 SSD Enclosure
USB3.2 TYPE-C™ TO NVME/SATA M.2 SSD ENCLOSURE
Model I-CASE USB31C-NVME
Interface Type-C™ to M.2
Support SSD type M-key NVMe/B+M key SATA/B+M key NVMe
Support SSD size 2230, 2242, 2260, 2280
Rating 5V via Type-C™
USB speed 10Gbps
Material Aluminum alloy+plastic
Windows XP/2000/2003/vista/7/8.1/10/11/Mac 10.0 and above;
Compatibility
format: NTFS/FAT/FAT32
QUICK INSTALLATION GUIDE
STEP 1 - INSTALLATION
1.1 Press open button on the bottom and push out plastic tray
1.2. Assemble silica gel plug into SSD hole (e.g 2280)
1.3 Assemble SSD at degree 45
1.4 Rotate the silica gel plug to lock SSD as below, then push into plastic tray till close
STEP 2 - CONNECTION
2.1 Connec Type-C™ cable with housing and PC
With the CE sign, Techly ensures that the product is conformed to the basic European
®
standards and directives.
WWW.TECHLY.COM
USB3.2 TYPE-C™ TO NVME/SATA
STEP 3 - NEW HARD DISK FORMAT
3.1 View "computer - Manage - disk management" to Find the new disk.
STEP 4 - NEW HARD DISK FORMAT
4.1 Right click the "Disk1", then click "New Simple Volume".
STEP 5 - HARD DISK PARTITION
5.1 According to the instruction, choose the size of partition, then click "Next" to finish.
STEP 6 - HARD DISK PARTITION
6.1 Then you can find the new hard disk in the "computer", it's ready to be use.
In compliance with EU Directive WEEE this product is marked with this symbol. It means
that used electrical and electronic products should not be mixed with general household
waste. There is a separate collections system for these products in compliance with WEEE
directive, otherwise contaminative and hazardous substances can pollute the environment.
M.2 SSD ENCLOSURE