Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BelFone BF-TR900 Series
Summary of Contents for BelFone BF-TR900 Series
- Page 1 － ＴＲ９００ Ｐｒｏｆｅｓｓｉｏｎａｌ Ｄｉｇｉｔａｌ Ｒｅｐｅａｔｅｒ...
- Page 3 Warning Since purchase and use of this device involves use of radio (station), it is required to procure corresponding approval formalities and a radio station license. The device shall be so used as approved in the radio station license. Anyone who engages in unauthorized setup for use of radio (station) or jamming radio service, or fails to operate following the approved business scope or otherwise violates the radio regulations will be punished by the radio administration according to...
- Page 4 Acknowledgement! Thank you for choosing BelFone series professional radio communication products! Since 1989, BelFone has been dedicated to research and exploration in the field of radio communication technology throughout the decades, and has developed leading smart technology in the industry. Underpinned by research,...
-
Page 5: Instructions Before Use
◆If you find any fault of the product, please turn off the power directly, and then contact the local distributor of BelFone; unless otherwise specified in this Manual, maintenance shall not be performed by any person other than a maintenance worker authorized by BelFone Company;... -
Page 6: Table Of Contents
Contents Unpacking and device inspection ..........01 Accessories supplied along the device ........01 Connect the palm microphone ...........01 Get familiar with the device ............02 Front view ................02 Indicator state ...............03 Back view ................04 Palm microphone(optional)............05 Basic operations ................06 LCD icon (TR900L) ...............06 LCD icon (TR900M) ..............07 Power on/off................08 Regulate the volume .............09... - Page 7 Simulcast function ..............20 Telephone gateway function..........21 Menu function................22 Contact list................23 Short message..............23 Call record ................23 Setting ..................23 Device information ..............24 Accessories ................24 Technical indicators ..............25 Statement..................27...
-
Page 8: Unpacking And Device Inspection
Unpacking and device inspection Note: The following instructions regarding unpacking are only for BelFone’s distributors, and service agencies or factories authorized by BelFone. Be careful when taking the device out of the packing box. You’d better count the accessories against the following list before discarding the packaging. -
Page 9: Get Familiar With The Device
Get familiar with the device Front view Menu button: When this button is Down arrow button: When this button pressed, the main menu will show; is pressed, the channel number will when it is long pressed , the current decrease; when it is long pressed , region and channel number will show the region number will decrease (programming supported) -
Page 10: Indicator State
Loudspeaker M button: Channel slot switch Microphone/frequency programming Hang up: Press this button to hang port 1 up, or long press to turn off/on the device Microphone/frequency programming A indicator: Channel slot 1 working port 2 state indication Right arrow button: When this button B indicator: Channel slot 2 working is pressed, the channel number will state indication... -
Page 11: Back View
Back view TX RF output port Satellite attachment unit port GPS antenna port Network port RX RF input port Ground terminal DC power input port ACC attachment unit port... -
Page 12: Palm Microphone(Optional)
Palm microphone(optional) An external microphone can be connected via the microphone port to realize man-machine conversation, and a palm microphone is supported. -
Page 13: Basic Operations
Up arrow button Down arrow button Menu/OK # Button Left arrow button Microphone Call Orange alarm Mode selection (only for BF-TR900L) PTT up * Button PTT down M button: Press it to switch time slot Long press to switch between Loudspeaker independent/auxiliary mode Back... -
Page 14: Lcd Icon (Tr900M)
Transmitting power: Self-defined Analog incoming voice call (grey: not cast the voice; orange: cast the voice) Monitor enabled DMR encryption All muted Keyboard locked Digital channel GPS enabled Analog channel USB connection Digital-analog compatible channel Interface board connected Master:Currently 2 slave repeaters Unread message are connected Standby slave repeater... -
Page 15: Power On/Off
Phone gateway enabled (no Loudspeaker on call forwarding) Phone-to-DMR inter-network call transfer Transmitting power: High Unreadmessage Transmitting power: Medium Inbox full Interface board registered with Transmitting power: Low the main control panel Interface board connected to Transmitting power: User-defined the local network All muted Interface board server connected Digital channel... -
Page 16: Regulate The Volume
Regulate the volume After startup, long press the Left or Right direction button to regulate the volume. Long press [Left ], and the volume will reduce by 10%; long press [Right ], and the volume will increase by 10%; the volume can be regulated within the range of 0~100%. -
Page 17: Channel Slot Selection
Long press [# ] for about 2s, and the interface will display the lock icon: ; in this case, no operation on the buttons is effective. Long press the [Menu ] and press [# ] to unlock the buttons. Channel slot selection When TR900L is at the digital channel, press [M ] to switch the current operation to channel slot 1 or 2;... -
Page 18: Function Description
Defined Name Function Description No function is assigned to the programmable button Undefined Press the button to enter the “Channel setting” menu Channel setting Press it to quickly switch the transmitting power: Low, Power switch medium, high, user-defined Press the button to turn on/off the monitoring switch Monitoring switch Use the button to quickly turn on or off the prompt tone Prompt tone switch... - Page 19 Press this button to set the background light – the Background light + brightness will progressively increase Press this button to switch to lower power Low power Press this button to switch to medium power Medium power Press this button to switch to high power High power Press this button to switch to a user-defined power User-defined power...
-
Page 20: One-Button Call Function
Use this button to quickly turn on or off the telephone Telephone gateway gateway function (only for TR900M) switch Press this button to enter the contact list menu Contact list (only for BF-TR900M) Press this button to enter the DMR contact list menu DMR contact list (only for TR900M) Press this button to enter the short message menu... -
Page 21: Set Signal Code
Set signal code The signal code configuration of the frequency programming software allows setting signal code operation to realize corresponding function; configurable functions can be quickly configured with reference to the buttons by entering corresponding function codes (*0~99#) when the device shows the standby interface. - Page 22 if voice service occurs at channel slot 1, indicator A will turn orange, and the interface will display the received signal intensity; if voice service occurs at channel slot 2, and it is at the repeating state, then indicator B will turn orange, and the interface will display the received signal intensity.
- Page 23 will show as a yellow loudspeaker, and the interface will show information of the calling and the called. If channel slot 2 is currently in operation and receives any voice, then indicator B will turn normally green, the channel slot 2 icons will show as a red loudspeaker, and the interface will show information of the calling and the called.
-
Page 24: Master Station
and multiple slave repeaters, it is required to configure a channel slot thereof to the IP interconnected repeater mode, so that after the network is connected, services may be transmitted from one repeater to the other repeaters. When the current channel slot operates in the IP interconnect- ed mode, the interface will show icon: (channel slot 1), (channel slot... - Page 25 IP, backup master repeater UDP port. Note: In one system, only one “master repeater” and on “backup master repeater” are permitted; other repeaters shall be configured as “equivalents”. The function is optional. 4. System networking function TR900M can be connected to BelFone intelligent interconnection system,...
-
Page 26: Analog Mode Function
and supports access to the system network for repeating DMR digital voice and data services, so as to realize interconnected communication in the networked mode. Note: System networking is optional. ● Register in network system A channel shall have the Register with the network system option ticked for the device to login to the system for corresponding operations. -
Page 27: Back-To-Back Function
2. Analog base radio mode TR900L supports the analog base radio mode. When the channel operates in the base radio mode, the interface will show the following icon: . If a microphone is connected, it is permitted to make a call or receive a voice call by pressing the PTT button. -
Page 28: Telephone Gateway Function
4G module of the microphone. If the telephone gateway function is enabled and calls are forwarded via DMR service, the interface will display the following icon: radio controller of BelFone intelligent interconnection system to realize networking of Simulcast... -
Page 29: Menu Function
Ｍｅｎｕ ｆｕｎｃｔｉｏｎ Frequent contacts Contact list All Contacts Contact list New Contacts New Group Contact list Manual dialing New Contact Contact list Manual dialing Write a message All Contacts Inbox Big Dipper New Contacts Short message Contact list Outbox Send SMS Preset message Write a message System SMS... -
Page 30: Contact List
Contact list To the TR900L contact list, up to 500 contacts can be added (including for individual, group and all calls). To the TR900M DMR contact list, up to 1,600 contacts can be added. Short message The TR900L message function is only valid in the digital base radio mode. TR900M messages include DMR messages.. -
Page 31: Device Information
modified to be optional, the frequency entered will be restricted to the frequency range of the device. Device information In the information menu of TR900, the name, number, real-time clock, firmware and CP version of the device can be viewed; TR900L allows viewing network information (MAC address, IP address, port number and gateway address), and IP interconnection information;... -
Page 32: Technical Indicators
Ｔｅｃｈｎｉｃａｌ ｉｎｄｉｃａｔｏｒｓ General Frequency range VH F： 150MHz UHF ：35 0MHz /4 00 MH z/4 50 MH z 12 8 Region T R90 0L T R9 0 0M First-level regions: 4 Second-level regions: 3000 Third-level regions: 3000 Number of channels T R9 0 0L 20 48 T R9 0 0M 37 76... - Page 33 Power of adjacent channel ≤6 0d B Spurious emission -3 6d Bm<1 GH z -3 0d Bm>1 GH z Digital voice encoder AMB E Receiving Sensitivity 3%B ER≤0.35 µV Frequency stability ≤±0.5ppm（without positioning） ≤±0.02 ppm （with positioning） Adjacent channel selectivity ≥6 0d B ≥7 0d B Intermodulation immunity...
-
Page 34: Statement
For any doubt, please contact us timely for specific explanation. Considering the fast development of wireless communication technology, BelFone reserves the right to modify the product design and specification without any further notification. Your understanding in this respect will be much... - Page 36 Add: A-15 Huaqiao Economic Development Zone, Shuangyang,Luojiang,Quanzhou,Fujian,China Tel: +86 595 28396717 Fax: +86 595 22771635 Email: overseas@belfone.com Website: www.belfone.com...
Need help?
Do you have a question about the BF-TR900 Series and is the answer not in the manual?
Questions and answers