Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ASUSTeK COMPUTER MB16AMTR
Summary of Contents for ASUSTeK COMPUTER MB16AMTR
- Page 1 Monitor Service Manual Model: MB16AMTR Version no.V01 Release date: Apr.15,2024...
-
Page 2: Copyright Information
LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. - Page 3 Table of Contents 1. Safety Precautions ........................ 4 2. Exploded View ........................5 3. Disassembly and Assembly Procedures ................6 4. Trouble Shooting ........................ 24...
-
Page 4: Safety Precautions
1. Safety Precautions Safety information Before setting up the monitor, carefully read all the documentation that came with the package. To prevent fire or shock hazard, never expose the monitor to rain or moisture. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. -
Page 5: Exploded View
2. Exploded View Description BEZEL L156WT-Gasus1-s1 KEY_FUNCTION BKT_IO stand-base ass'y(R) stand-base ass'y(L) REAR_COVER PLATE_ REAR MAIN BOARD BATTERY 3.0V 1P SPEAKER KEY BOARD HEADPHONE JACK BOARD PANEL SCREW M2 2 SCREW M2 2 SCREW Q2 2.3 SCREW M2 3... -
Page 6: Disassembly And Assembly Procedures
3. Disassembly and Assembly Procedures 3.1 Precaution Please read the precautions as follows to prevent any damages to the LCD Monitor. Make sure all power connection is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally. - Page 7 3.3. Disassembly Procedure Main Subsystem 3.3.1 Bezel 1. Use disassembly tool to open all the latches along the edge of the BEZEL. (Note: Don’t damage the BEZEL.)
- Page 8 2. Disconnect the connector to remove the Panel. ...
- Page 9 Main Board 1. Remove the tapes. 2. Unscrew the screws and disconnect the pins. Remove the Speaker, the BATTERY. .Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm ...
- Page 10 Speaker Disconnect the pin to remove the speaker. Foot Pad Remove the tape The Label only for domestic sale BATTERY Disconnect the pin to remove the BATTERY ...
- Page 11 3. Remove the screws to remove the main board/key board/Headphone Jack Board and BKT_IO. Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm Disconnect the pins to remove Headphone Jack the boards and the BKT IO Board Main Board BKT IO Key Board ...
- Page 12 Disconnect the pins. Disconnect the pins. Remove the KEY_FUNCTION 4. Release the screws to remove the stand-base ass'y. Description Q’ty Screw Torque Picture &Spec Screw 2.5±0.5kgf.cm ...
- Page 13 The main board, key board, Headphone Jack Board and PLATE_ REAR Main Board Headphone Key Board Jack Board PLATE_ REAR ...
- Page 14 3.3.2 Panel 1. The Panel and the Mylar. ...
- Page 15 2. The Bezel The rear cover 3. ...
-
Page 16: Assembly Procedure
3.4 Assembly Procedure 3.4.1 Panel 1. Prepare the panel, the rear cover and the bezel. The rear cover The Bezel Put the Mylar on the panel. ... - Page 17 3.4.2 Main Subsystem The main board, key board, Headphone Jack Board and PLATE_ REAR Main Board ...
- Page 18 Headphone Key Board Jack Board PLATE_ REAR Prepare the stand-base ass'y and assemble as below. Description Q’ty Screw Torque Picture &Spec Screw 2.5±0.5kgf.cm ...
-
Page 19: Key Function
Connect cables and assemble the KEY_FUNCTION Assemble the KEY FUNCTION Connect the pins to assemble the boards and the BKT IO Headphone Jack Board Main Board BKT IO Key Board ... - Page 20 Screw the screws to assemble the main board/key board/Headphone Jack Board and BKT_IO. Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm The Label only for domestic sale BATTERY Connect the pin to assemble the BATTERY ...
- Page 21 Connect the pin to assemble the speaker. Foot Pad Paste the tape Assemble the Speaker. Description Q’ty Screw Torque Picture &Spec Screw 1.2±0.4kgf.cm ...
- Page 22 Paste the tapes. Connect the pin. ...
- Page 23 ...
-
Page 24: Trouble Shooting
4. Trouble Shooting ...
Need help?
Do you have a question about the MB16AMTR and is the answer not in the manual?
Questions and answers