Mantis ULV MANKAR-HQ R-35 Operating Instructions Manual

OPERATING INSTRUCTIONS
Important:
Before application, carefully read the usage instructions for the unit and the active agent you are
using!
Observe safety instructions!
For questions regarding weed killers, consult the manufacturer!
Observe the requirements and regional regulations for the use of weed killer and, if necessary,
obtain approval from the responsible authorities (e.g., environmental conservation agency)!
Application is to be performed only by a competent user.
Remarks about usage of the unit:
Settings: For testing the spraying process and calibrating the flow rate
please use the exact preparation of active agent that is to be applied later.
Use weed killer for testing the spray action and calibration of the flow rate.
Usage: Hold the atomiser close to the ground - if the atomiser is held too high, there is a risk of drift.
Cleaning: Do not clean the device with a high-pressure cleaner or a strong jet of water.
Storage: Store the unit at an angle of between ca. 45° (= work position) and 0° (= horizontal) to the
floor (see picture).
Keep the applicator and weed killer out of the reach of children.
Work position
Noise emission from the unit equates to less than 70 dB(A).
MANKAR-HQ R-35
ULV- Applicator
Germany 21502 Geesthacht, Vierlander Str. 11 a
www.mantis-ulv.com Email: mantis@mantis-ulv.com
Storage: correct
Manufacturer:
Mantis ULV-Sprühgeräte GmbH
Telephone +49(0)4152-8459-0
06/2023