Summary of Contents for Chapman FR150
- Page 1 FR150 Instructions Chapman Machinery Ltd, Hele Barton, Week St. Mary, Holsworthy, Devon EX22 6XR +44(0)1288 308149 sales@chapman.co.uk...
-
Page 2: Hse Information
NOTE: The information contained in this manual is correct at the time of going to press. However, in the course of development, changes in specification are inevitable. Should you find the information given differs from your machine, please contact Chapman Machinery Ltd direct for advice. -
Page 3: Technical Information
Description The FR150 Field Roller is a towed mowing attachment designed for rolling fields, paddocks & other such surfaces to flatten bumps and imperfections. The FR150 features a 1.5m working width, robust steel frame, integrated scraper bar and heavy duty bearings. A swivel coupling is fitted as standard for 50mm ball hitch, and a pin hitch attachment can be specified as an option. -
Page 4: Attaching The Machine
English Implement Decals If your implement does not contain all of the decals shown below, please contact your equipment supplier for replacement decals before use. Note: All decals must be present and visible. It is imperative that these are replaced if damaged to prevent potential harm to users. CAUTION - Read operators manual before handling this machine. -
Page 5: Paint Maintenance
Paint Maintenance The steelwork and chassis on the FR150 is manufactured from various grades of steel, which is fully shot blasted to SA2.5 surface roughness, prior to application of polyester powder applied paint to a minimum DFT (Dry Film Thickness) of 100 microns. -
Page 6: Grease Point Location
English Grease Point Location Lubricate the following grease points using an NLGI 2 viscosity grease suitable for the expected temperature range in line with the maintenance schedule. Drum Bearings (1 each end) Water Ballasting The roller drum can be filled with water to increase the weight of the roller and subsequent rolling effect. Each end of the drum has a bung, as shown below, located at 180°... -
Page 7: Maintenance
English Maintenance All maintenance, cleaning and repair operations must be performed with the machine suitably supported. NOTE: For commercial use, log hours of operation in a maintenance booklet to ensure proper maintenance intervals and continued service. Maintenance Schedule After 1 hour of work After every 100 hours (or annually, •... -
Page 8: Warranty Conditions
24 months from the date of sale. This warranty does not affect your statutory rights, but merely adds to them. Should you have a problem within 24 months from the date of sale please contact your original dealer, or Chapman Machinery’s Service Department. - Page 9 English DECLARATION OF CONFORMITY EU: Machinery Directive 2006/42/EC UK: Supply of Machinery (Safety) Regulations 2008 Manufacturer: Chapman Machinery Ltd, Hele Barton, Week St Mary, Holsworthy, Devon, EX22 6XR, UK Product(s) covered: FR150 Field Roller Serial Number: Stated on Accompanying Invoice...
Need help?
Do you have a question about the FR150 and is the answer not in the manual?
Questions and answers