Do you have a question about the OE-CA51WM-01 and is the answer not in the manual?
Questions and answers
Summary of Contents for OpenEye OE-CA51WM-01
Page 1
Follow the Quick Start Guide for installing an OpenEye cloud camera and adding it to OpenEye Web Services. NOTE: Only install the wall mount after a hole is drilled in the wall for routing power lines, DI/DO, and Ethernet cables.
Page 2
NOTE: Use the correct type of screws when installing cameras to the mounting cap. You will need to pass the cables through the waterproof connectors, and then use a crimping tool to connect the cable wires to an RJ45 connector. https://answers.openeye.net/Install/Hardware_and_OS/Accessories/Camera_Accessories/OE-CA51WM-01_Installation_Guide Updated: Thu, 10 Oct 2024 09:31:51 GMT Powered by...
Page 3
6. Proceed with initial setup such as enabling network access, focus tuning, or zooming. When done, secure the outer dome cover. Related Links Cloud Camera Device Configuration https://answers.openeye.net/Install/Hardware_and_OS/Accessories/Camera_Accessories/OE-CA51WM-01_Installation_Guide Updated: Thu, 10 Oct 2024 09:31:51 GMT Powered by...
Need help?
Do you have a question about the OE-CA51WM-01 and is the answer not in the manual?
Questions and answers