Subscribe to Our Youtube Channel
Related Manuals for Heltec Automation HT-BCT10A30V
Summary of Contents for Heltec Automation HT-BCT10A30V
- Page 1 Chengdu Heltec Energy Technology Co., Ltd Whole Group Under 30V 10A Battery Capacity Tester User Manual (HT-BCT10A30V) Heltec Energy www.heltec-energy.com...
-
Page 2: Product Parameters
This product and accessories will be upgraded from time to time without notice. 2. Product Parameters Model HT-BCT10A30V Charging range 1-30V/0.5-10A Adj Discharge range 1-30V/0.5-10A Adj... -
Page 3: Appearance Introduction
Chengdu Heltec Energy Technology Co., Ltd 3. Appearance introduction Power switch:If the power is suddenly cut off during the test, the test data will not be saved. Display screens: Display charging and discharging parameters and discharge curve Coding switches:Rotate to adjust working mode, press to set parameters Start/Stop button:any operation in running state must be paused first. - Page 4 Chengdu Heltec Energy Technology Co., Ltd 4. Use method 1．Start up first, and then clip the battery. Press the setting knob to enter the setting page, rotate left and right to adjust the parameters, press to determine, Set the parameters correctly and save the exit. Parameters to be set in Charging mode: Single cell Charging End V: lithium titan ate 2.7-2.8V, 18650/ternary/polymer 4.1-4.2V, lithium iron phosphate 3.6-3.65V...
- Page 5 Chengdu Heltec Energy Technology Co., Ltd Resting time: Let the battery cool down and rest for a while, usually set to 10 minutes. Cycle: Max 5 times, 1 times(charge-discharge-charge), 2 times(charge-discharge-charge-discharge-charge), 3 times(charge-discharge-charge-discharge-charge-discharge-charge). 2．Return to the home page, rotate the setting button to the left or right to the working state, and press again to pause.
- Page 6 Chengdu Heltec Energy Technology Co., Ltd Or the internal resistance of the battery is too large and it is close to being scrapped. If the test result is empty, the working step is less than 2 minutes, so the data will not be recorded.
- Page 7 Chengdu Heltec Energy Technology Co., Ltd 6. The warranty policy When the product has quality problems, and the warranty will be one year. The warranty service is limited to normal use: man-made damage, self-disassembly, modification and repair, use not in accordance with the instructions, and damage caused by external force majeure factors are not within the scope of free warranty.
Need help?
Do you have a question about the HT-BCT10A30V and is the answer not in the manual?
Questions and answers