Note: Your device comes with the SIM(s) already installed into the device. Device Views Front View Back View Step 1 Attach LTE cellular antennas...
Page 3
Step 2 Connect the Ethernet cables • LAN1 is for local management • LAN2 is for PoE and passthrough The Cradlepoint logo LED on top of the adapter begins to light up as the endpoint runs through its bootup sequence.
Page 4
Understanding LEDs The Cradlepoint logo on the top of the L950 LTE adapter uses LED lights to communicate various status conditions. Use the chart below to verify the status of your router after the boot up cycle. INDICATOR MEANING No Light = Powered off. Solid White = Online and connected to NetCloud Manager (NCM) or Online Captive Modem mode.
Page 5
Step 3 Primary cellular solution architecture If you should require assistance, please contact support at our Help Center or 1-877-710-5673.
Need help?
Do you have a question about the Cradlepoint L950 and is the answer not in the manual?
Questions and answers