1. Manuals
  2. Brands
  3. KELISS Manuals
  4. Personal Care Products
  5. MTS8 SS Series
  6. Installation manual

KELISS MTS8 SS Series Installation Manual

Smart mirror
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Keliss
Dear customer:
Thank you for choosing Keliss Smart Mirror!
Embed with exquisite workmanship and engineering techniques, based on
high-quality standards of production, Keliss Smart Mirror thrives in the modern
smart home industry. However, the products still need certain care and
maintenance for a better user experience.
How to clean a mirror?
1. Dip a piece of lint-free cloth with warm water and wring it out, wipe the mirror
surface, and then wipe out the remaining water with another piece of dried cloth.
2. Do not spray the cleaners directly on the mirror, simply apply it to the cloth or
mix it with the warm water.
3. Use neutral cleaners instead of acid or alkali ones, also avoid using abrasive
cleaners which can cause damage to all parts of a mirror.
Note: The cleaners should not include ammonia.
If you follow all the simple procedures above, your smart mirror will always look
stunning as brand-new!
Sincerely,
Keliss

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MTS8 SS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for KELISS MTS8 SS Series

  • Page 1 Thank you for choosing Keliss Smart Mirror! Embed with exquisite workmanship and engineering techniques, based on high-quality standards of production, Keliss Smart Mirror thrives in the modern smart home industry. However, the products still need certain care and maintenance for a better user experience.
  • Page 2 Keliss...

  • Page 3: Warning Grounding Instructions

    LED MIRROR INSTALLATION GUIDE Please read the information below before using WARNING To reduce the risk of burns, fire, electric shock, or injury to people, please use this furnishing only for its intended purpose as described in these instructions. Do not use any attachments that are not recommended by the manufacturer.

  • Page 4: Tools Required For Assembly

    LED MIRROR INSTALLATION GUIDE TOOLS REQUIRED FOR ASSEMBLY 1/8” Drill Bit Electrical Drill Pencil Phillips Screwdriver Tape Measure Level PARTS INCLUDED WALL HANGER SCREW WALL PLUG (x4) (x4) (x2) NOTE: Determine overall mirror dimensions before proceeding to installation. *All dimensions & specifications are approximate and subject to change without notice.

  • Page 5: Electric Connections

    LED MIRROR INSTALLATION GUIDE ELECTRIC CONNECTIONS ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN WARNING: Shut off power before wiring the mirror. WARNING: An electrical option mirror must be wired to a 20 Amp GFl (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.
  • Page 6 SUPPORT LOCATION PLACEMENT Measure the center of the holes and mark the Select the desired position of the mirror. drilling locations to ensure markings are Mark the curve at the top of the mirror. leveled. PLACEMENT INSTALL SCREWS Hang the mirror onto the wall. Make holes with a drill and fill them with the supplied plugs and screws.

  • Page 7: Final Assembly

    FINAL ASSEMBLY Single button touch switch Touch to turn the task light and defogger on or off. Press and hold to change the color temperature of the task light. Double buttons touch switch Touch to turn the task light on or off. Touch to turn the defogger on or off.

Table of Contents