Holiday Outdoor Decor Panel Tree Setup

Holiday Outdoor Decor
Thank you for your purchase of your new Panel Tree.
Below you will find instructions detailing how to assemble our panel
trees. This guide is for trees from 14' to 50' tall.
For topper installation please see Step Six.
We hope you enjoy your tree as much as we did creating it for you.
If you need additional help, please call your Design Consultant or
visit us online at www.holidayoutdoordecor.com.
Important Note: If you have purchased a panel tree from us in the past, our new
tree design is now optimized for added durability, style and ease of installation
with the same look and feel as the original. The installation steps from previous
years are mostly the same except for a few small changes to the cone and panel
assembly steps.
Step Two: Align & Assemble Bottom Tier
HolidayOutdoorDecor.com
Step One: Gather Components
Bottom
Tier
Panel Tree Set Up
BEFORE YOU START - Make sure you are installing in a
level spot. If you are installing in a grass or gravel area,
make sure to use shims to level it off before starting
assembly. You will have to shim the tier after the first tier is
assembled. It is reccomended to make sure the tree is level
in at least two directions.
Components Needed:
1. Wiring Harnesses
2. U-Bolts
3. Framework
4. Decorated Panels
5. Mounting Hardware
6. Tree Topper
Always build the base of your tree with the highest number
frame pieces received.
(Ex.) When building a 14' Tree (the tree will have two tiers
and a cone), you will start building tier two first.
The number of the tier will be painted on the framework
in white.
1. Layout the bottom tier in order clockwise, starting with
where you want the ladder to be.
2. Grab roughly 20 of the U-Bolts provided before you
begin assembling the frame. Start by placing one U-bolt in
the middle of the vertical between each section of frame.
Make sure to keep the top flush with the next section while
assembling.
877.444.8888