Advertisement
Quick Links
Advertisement
Related Manuals for Bay Alarm Medical SOS Micro
Summary of Contents for Bay Alarm Medical SOS Micro
- Page 1 U S E R G U I D E User Guide...
- Page 2 Plug in the charging cradle and set the SOS Micro™ into place by pressing it down. The SOS Micro™ will announce ‘Charging’.
- Page 3 HOW TO CHARGE SOS Micro™ Locate the gold charging pins on the back of SOS Micro™ device. Plug in the charging cradle and wait for a red light to turn on. Line up the gold pins on SOS Micro™ with either set of gold pins on the charging cradle.
- Page 4 MEET SOS Micro™ 1. Call Button 3. Speaker 2. Blue Status Light/Red 4. Microphones Status Light 5. Charging Pins Red status light around call button • While charging, the red status light will flash every 5 seconds until the device is fully charged.
- Page 5 * If does not connect properly, please SOS Micro™ contact Bay Alarm Medical immediately. AVA - AUTOMATED VOICE ASSISTANT When you press your call button, our automated virtual assistant AVA will answer your call. A live operator will be available if help is needed.
- Page 6 REPLACE WRISTBAND how to call for help 1. Turn over and locate the small silver SOS Micro™ quick release pins on each wrist strap. 2. To remove the existing wrist straps, slide the quick release pin toward the center of the device and pivot the strap away from the device.
- Page 7 You can also spray household cleaner onto the cleaning cloth (though do not spray directly onto the device or cradle) to remove debris. Example of a SOS Micro™ customer cleaning the gold charging contacts on the bottom of SOS Micro™.
- Page 8 Water-Resistant: SOS Micro™ is IP67 water-resistant. SOS Micro™ should not be submerged. SOS Micro™ should be towel-dried after exposure to water. Pacemakers: Individuals with pacemakers should consult their physician...
- Page 9 Location-Based Services: Some of the Equipment uses technology to permit third- parties, including the Monitoring Center, to determine where you are physically located at any given time (the “Location Based Services”). Location Based Services may work even if you are not in communication with the Monitoring Center.
- Page 10 ANY AND ALL LOCATION-BASED INFORMATION IS MADE AVAILABLE FOR INFORMATIONAL AND PLANNING PURPOSES ONLY AND IS NOT INTENDED TO BE RELIED UPON IN SITUATIONS WHERE PRECISE LOCATION INFORMATION IS NEEDED OR WHERE ERRONEOUS, INACCURATE, TIME-DELAYED OR INCOMPLETE LOCATION OR MAP DATA MAY LEAD TO DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE.
- Page 11 — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult Bay Alarm Medical or an experienced radio/TV technician for help.
- Page 12 This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the SOS Micro and is the answer not in the manual?
Questions and answers
Should my device blink red and blue?
Based on the provided context, the Bay Alarm Medical Micro device blinks blue but there is no information that it blinks red.
This answer is automatically generated
How do I power off the micro?
How do I reset my SOS Micro?