Summary of Contents for SULO ORWAK 3500
- Page 1 Edition1.3 From serial no 160815- Publ. no 1000271-00 OM 3500, 2023-02 ORWAK 3500 ORIGINAL OPERATING INSTRUCTIONS...
-
Page 3: Table Of Contents
English English CONTENTS CONTENTS Safety information... Safety information... 18 Parts of the machine..Parts of the machine..19 Safety......Safety......20 Control panel ....Control panel ....21 Operating instruction..Operating instruction..Weekly inspection and Weekly inspection and maintenance . - Page 4 English OPERATOR WARNING & DUTY • This manual must be available permanently near the baler. • Each operator must read and follow the full instruction of this manual before being authorize. • All operator must absolutely study and fully understand the operator’s manual, specifically pay a particular attention to the safety procedure section.
-
Page 5: Parts Of The Machine
PARTS OF THE MACHINE Strap holders Strap guide Control panel Data plate Emergency stop Press plate Shutter Strap slots Door Ejection belt Hooks Debaling mechanism Door flap Data plate Main switch Hydraulics Debaling buttons 4878543-00 Cover/protection for hydraulic units Hooks Turnbuckle Rear protection/protection for debaling mechanism... -
Page 6: Safety
English SAFETY Please read the entire operating instructions BEFORE installing and starting the machine. Our Warranty and Product Liability require that: that regulations are followed and that no alterations or modifications are made. • that original spare parts are used, and hydraulic oils and lubricants recommended by the •... -
Page 7: Range Of Application
English RANGE OF APPLICATION The machine is a hydraulically operated baler designed for compacting bulky materials such as cardboard, paper, and plastic. The material being compacted should be evenly distributed in the chamber. Compaction of compact or pre- compacted material may result in damage to the machine. The machine should only be used in areas with a roof, wind protection and normal lighting. -
Page 8: Operating Instruction
English OPERATING INSTRUCTIONS 4872304-00 (VG19HD) Paper Plastic operating procedure – manual start WARNING! Only the operator AUTO is allowed in the machine's working area! Mounting the strap Open the shutter. Then open the door by first opening the flap with the turnbuckle. -
Page 9: Operating Instruction
English OPERATING INSTRUCTIONS 4872304-00 (VG19HD) Paper Plastic operating procedure – automatic start WARNING! Only the operator AUTO is allowed in the machine's working area! Mounting the strap Open the shutter. Then open the door by first opening the flap with the turnbuckle. -
Page 10: Weekly Inspection And Maintenance
English WEEKLY INSPECTION AND MAINTENANCE AUTO NOTE! During inspection and maintenance, servicing and the removal of trapped waste, etc: 1. Always turn the main switch to "0" and secure it with a padlock. 2. Do not work inside the machine. Hydraulik oil >+5 °C VG 32-68... -
Page 11: Safety Checks
English SAFETY CHECKS – Check the shutter switch: it must not be possible to start the machine if the upper shutter is open/opened. – Check the baling push buttons: it must not be possible to remove the bale from the machine using just one baling push button. -
Page 12: Technical Specification
English TECHNICAL DIMENSIONAL DRAWING SPECIFICATIONS GENERAL DATA Total weight: 2100 kg Transport height: 2340 (2440) mm Dimensions: Height: 3225 mm Width: 1765 mm Depth: 1160 mm Depth with door open: 2410 mm Recommended space for a machine in operation (work area): Height: 3300 mm Width:... -
Page 13: Ec Declaration Of Conformity
English EC DECLARATION OF CONFORMITY Orwak AB Orwak AB Svetsaregatan 4 Svetsaregatan 4 SE-576 33 Sävsjö, Sweden SE-576 33 Sävsjö, Sweden Tel: +46-382-15700 Tel: +46-382-15700 declare under our sole responsibility that the product model 4903500-100 - 4903500-999 4903500-S101 - 4903500-S999 to which this declaration relates is in conformity with the following standards or other normative documents following the provisions of Directives 2006/42/EC (Machinery Directive) -
Page 14: Installation
English INSTALLATION Please read the whole instructions before commencing the installation! Failure to follow the instructions may result in personal injury. The installation must be carried out by trained personnel. Some of the operations involve dangerous machine movement. Take every precaution, as there is a great risk of serious crush injuries. -
Page 15: Installation
English INSTALLATION RAISE CYLINDER Connect the machine to the wall outlet. Svetsaregatan 4 576 33 Sävsjö Sweden Type Date Product No Weight Check the direction of rotation of Serial No the motor by pressing the arrow Temperature range of use (standard oil): +5°C to +40°C +40 °C Temperature range of use (special oil): -10°C to +40°C +5 °C... - Page 16 English INSTALLATION CONTINUATION Remove screw and nut as the press plate rested on underneath transport. Attach the bale donor rod. Screw the cable connector to the sensor. Close door and door. Press the up arrow. Check the oil level when the press plate is in its uppermost position.The oil level is visible on the rear side.
- Page 17 English...
- Page 18 HYDRAULIC SCHEMARIC - 7,5 KW 3500 -100 ydraulic diagram Item Item no. English no. English 1 Tank 1 Tank 2 Complete hydraulic filter 2 Complete hydraulic filter 2 Hydraulic filter cartridge 2 Hydraulic filter cartridge 3 Hydraulic pump 3 Hydraulic pump 4 Electric motor 4 Electric motor 5 Manifold block...
- Page 19 lEctrical wiring diagram...
- Page 20 lEctrical wiring diagram...
- Page 21 lEctrical wiring diagram...
- Page 22 lEctrical wiring diagram...
- Page 24 COMPACTION SOLUTIONS FOR MOST TYPES OF WASTE ORWAK develops solutions for sorting and recycling waste ORWAK develops solutions for sorting and recycling waste materials that improve business efficiency, contribute to a materials that improve business efficiency, contribute to a cleaner working and natural environment to provide the best cleaner working and natural environment to provide the best total waste handling economy.
Need help?
Do you have a question about the ORWAK 3500 and is the answer not in the manual?
Questions and answers